Olá!
Já procurei por todo o forum e fiz várias tentativas, mas sem sucesso...
Tenho um Servidor com o Kurumin 5.0 rodando Squid, Samba e compartilhando a Internet, está fudo funcionando, só não consigo configurar o redirecionamento para as máquinas WinXP da rede para poder acessá-las de fora da empresa.
Segue abaixo meu arquivo de configuração para saber o que posso estar fazendo errado.
Valeu!
#!/bin/bash
# Script de configuração do iptables gerado pelo configurador do Kurumin
# Este script pode ser usado em outras distribuições Linux que utilizam o Kernel 2.4 em diante
# Por Carlos E. Morimoto
firewall_start(){
# Abre para uma faixa de endereços da rede local
iptables -A INPUT -p tcp -s 192.168.0.0/255.255.255.0 -j ACCEPT
iptables -A INPUT -p udp -s 192.168.0.0/255.255.255.0 -j ACCEPT
iptables -A INPUT -p tcp -s 0.0.0.0/0 -j ACCEPT
iptables -A INPUT -p udp -s 0.0.0.0/0 -j ACCEPT
# Abre uma porta (inclusive para a Internet)
iptables -A INPUT -p tcp --destination-port 22 -j ACCEPT
# Abre uma porta (inclusive para a Internet)
iptables -A INPUT -p tcp --destination-port 6881 -j ACCEPT
# Abre uma porta (inclusive para a Internet)
iptables -A INPUT -p tcp --destination-port 5800 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5801 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5802 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5803 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5804 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5805 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5806 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5807 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5808 -j ACCEPT
# Abre uma porta (inclusive para a Internet)
iptables -A INPUT -p tcp --destination-port 5900 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5901 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5902 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5903 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5904 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5905 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5906 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5907 -j ACCEPT
iptables -A INPUT -p tcp --destination-port 5908 -j ACCEPT
# Ignora pings
# echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_all
# Protege contra synflood
echo "1" > /proc/sys/net/ipv4/tcp_syncookies
# Proteção contra ICMP Broadcasting
echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
# Bloqueia traceroute
iptables -A INPUT -p udp --dport 33435:33525 -j DROP
# Proteções diversas contra portscanners, ping of death, ataques DoS, etc.
iptables -A FORWARD -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT
iptables -A FORWARD -p tcp -m limit --limit 1/s -j ACCEPT
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit --limit 1/s -j ACCEPT
iptables -A FORWARD --protocol tcp --tcp-flags ALL SYN,ACK -j DROP
iptables -A FORWARD -m unclean -j DROP
iptables -A INPUT -m state --state INVALID -j DROP
iptables -N VALID_CHECK
iptables -A VALID_CHECK -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP
iptables -A VALID_CHECK -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
iptables -A VALID_CHECK -p tcp --tcp-flags ALL ALL -j DROP
iptables -A VALID_CHECK -p tcp --tcp-flags ALL FIN -j DROP
iptables -A VALID_CHECK -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
iptables -A VALID_CHECK -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP
iptables -A VALID_CHECK -p tcp --tcp-flags ALL NONE -j DROP
# Abre para a interface de loopback.
# Esta regra é essencial para o KDE e outros programas gráficos funcionarem adequadamente.
iptables -A INPUT -p tcp --syn -s 127.0.0.1/255.0.0.0 -j ACCEPT
iptables -A INPUT -i lo -j ACCEPT
# Fecha as portas udp de 1 a 1024, abre para o localhost
iptables -A INPUT -p udp -s 127.0.0.1/255.0.0.0 -j ACCEPT
iptables -A INPUT -p udp --dport 1:1024 -j DROP
iptables -A INPUT -p udp --dport 59229 -j DROP
# Firewall liberando portas para o VNC
#coloque aqui seu IP p. ex. "200.246.13.45"
IP_ORIGEM="0.0.0.0/0"
IP_DESTINO="IP do Speedy"
# Abre portas para o VNC
iptables -t filter -A INPUT -p tcp --dport 5900 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5800 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5902 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5802 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5903 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5803 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5904 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5804 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5905 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5805 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5906 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5806 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5907 -j ACCEPT -i eth0
iptables -t filter -A INPUT -p tcp --dport 5807 -j ACCEPT -i eth0
# Redirecionamento das portas do VNC
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5802 -j DNAT --to-destination 192.168.0.2:5800
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5902 -j DNAT --to-destination 192.168.0.2:5900
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5803 -j DNAT --to-destination 192.168.0.3:5800
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5903 -j DNAT --to-destination 192.168.0.3:5900
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5804 -j DNAT --to-destination 192.168.0.4:5800
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5904 -j DNAT --to-destination 192.168.0.4:5900
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5805 -j DNAT --to-destination 192.168.0.5:5800
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5905 -j DNAT --to-destination 192.168.0.5:5900
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5806 -j DNAT --to-destination 192.168.0.6:5800
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5906 -j DNAT --to-destination 192.168.0.6:5900
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5807 -j DNAT --to-destination 192.168.0.7:5800
iptables -t nat -A PREROUTING -p tcp -s $IP_ORIGEM -d $IP_DESTINO --dport 5907 -j DNAT --to-destination 192.168.0.7:5900
# permite pacotes da Internet para a maquina com o VNC Server
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.1 --dport 5800 -j ACCEPT
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.2 --dport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.3 --dport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.4 --dport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.5 --dport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.6 --dport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -s $IP_ORIGEM -d 192.168.0.7 --dport 5900 -j ACCEPT
# permite pacotes de reposta da maquina com o VNC Server
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.1 --sport 5800 -j ACCEPT
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.2 --sport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.3 --sport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.4 --sport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.5 --sport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.6 --sport 5900 -j ACCEPT
iptables -A FORWARD -p tcp -d $IP_ORIGEM -s 192.168.0.7 --sport 5900 -j ACCEPT
# Esta regra é o coração do firewall do Kurumin,
# ela bloqueia qualquer conexão que não tenha sido permitida acima, justamente por isso ela é a última da cadeia.
iptables -A INPUT -p tcp --syn -j DROP
/etc/skel-fix/firewall-msg
}
firewall_stop(){
iptables -F
iptables -X
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
}
case "$1" in
"start")
firewall_start
;;
"stop")
firewall_stop
echo "O kurumin-firewall está sendo desativado"
sleep 2
echo "ok."
;;
"restart")
echo "O kurumin-firewall está sendo desativado"
sleep 1
echo "ok."
firewall_stop; firewall_start
;;
*)
iptables -L -n
esac