Bom dia,
Estou com um leve problema nas minas placas de rede, elas sobm OK quando reinicio o comutador, mas quando uso o comando /etc/init.d/networking restart só a placa eth1 sobe:
Abaixo meu arquivo /etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
# LAN
#allow-hotplug eth0
iface eth0 inet manual
address 192.168.1.1
netmask 255.255.255.0
gateway 192.168.1.1
broadcast 192.168.1.255
network 192.168.1.0
dns-nameservers 127.0.0.1 200.146.35.35 200.146.36.36
# WAN GVT
#allow-hotplug eth1
#iface eth1 inet dhcp
# WAN EMBRATEL
#allow-hotplug eth2
iface eth2 inet manual
address 189.55.62.244
netmask 255.255.255.248
gateway 189.55.62.241
broadcast 189.55.62.240
network 189.55.62.247
dns-nameservers 127.0.0.1 200.255.255.66 200.255.255.70
auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth1 up # line maintained by pppoeconf
provider dsl-provider
auto eth1
iface eth1 inet manual