Página 2 de 2 PrimeiroPrimeiro 12
+ Responder ao Tópico



  1. sem duvida o xr2 eh melhor, mas não quer dizer que o engenius não seja bom, como foi dito anteriormente, pode ser interferencia, ou pigtails ou ateh mesmo antena.

  2. Citação Postado originalmente por numlock Ver Post
    cara esses cartões xr sr sao para ponto a ponto (alta potencia) para (ponto multiponto) use um com menos potencia r52, r52h ou senao mesmo

    Concordo com vc amigo, as vzs o pessoal procura potencia pra situação q ñ é necessário, esses cartões XR assim como o proprio engenios são muito bons para ponto a ponto, o engenios mesmo para multiponto da até alergia em falar, ja os r52 achei ótimos esses cartões.



  3. Citação Postado originalmente por Magal Ver Post
    Os cartões SR e XR são superiores aos outros, as configuracões deles são diferentes do Engenius em alguns pontos.

    Post as suas configuracões para poder lhe ajudar.
    ok amigos estou postando toda a minha configuraçao com imagens e um export em wireless para q possam me ajudar nesta dor de cabeça agradeço a todos desde ja....

    segue export da configuraçao:

    [CYBERPOOL@Turbonet] interface wireless> export
    # jan/10/2000 08:56:02 by RouterOS 2.9.50
    # software id = HILT-PUT
    #
    / interface wireless
    (CARTAO ENGENIUS PARA LINK 5.8)
    set "ZIROK 5.8" name="ZIROK 5.8" mtu=1500 mac-address=00:02:6F:4F:65:54 arp=enabled disable-running-check=no \
    radio-name="POOLTRONIC'S" mode=bridge ssid="LINK RADIO 2" area="" frequency-mode=manual-txpower \
    country=no_country_set antenna-gain=0 frequency=5825 band=5ghz scan-list=default rate-set=default \
    supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps \
    basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007 ack-timeout=dynamic tx-power-mode=default \
    noise-floor-threshold=default periodic-calibration=default periodic-calibration-interval=60 burst-time=disabled \
    dfs-mode=none antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 \
    wds-ignore-ssid=yes update-stats-interval=disabled default-authentication=yes default-forwarding=no \
    default-ap-tx-limit=0 default-client-tx-limit=0 proprietary-extensions=post-2.9.25 hide-ssid=no security-profile="POOL \
    SECURITY" disconnect-timeout=3s on-fail-retry-time=100ms hw-retries=15 preamble-mode=both compression=no \
    allow-sharedkey=no comment="" disabled=no
    (CARTAO UBIQUITI XR2 PARA CLIENTES 2.4)
    set "SETORIAL 1" name="SETORIAL 1" mtu=1500 mac-address=00:15:6D:64:B2:14 arp=enabled disable-running-check=no \
    radio-name="POOLTRONIC'S" mode=ap-bridge ssid="TURBONET R-5 A-SETOR 1" area="" frequency-mode=manual-txpower \
    country=no_country_set antenna-gain=0 frequency=2462 band=2.4ghz-b/g scan-list=default rate-set=configured \
    supported-rates-b=5.5Mbps,11Mbps supported-rates-a/g=9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps \
    basic-rates-b=5.5Mbps,11Mbps basic-rates-a/g=24Mbps,36Mbps,48Mbps,54Mbps max-station-count=2007 ack-timeout=90 \
    tx-power=14 tx-power-mode=card-rates noise-floor-threshold=default periodic-calibration=enabled \
    periodic-calibration-interval=60 burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled \
    wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=no update-stats-interval=disabled \
    default-authentication=yes default-forwarding=no default-ap-tx-limit=0 default-client-tx-limit=0 \
    proprietary-extensions=post-2.9.25 hide-ssid=no security-profile="POOL SECURITY CLIENTE" disconnect-timeout=3s \
    on-fail-retry-time=100ms hw-retries=15 preamble-mode=both compression=no allow-sharedkey=no comment="" disabled=no
    (CARTAO UBIQUITI XR2 PARA CLIENTES 2.4)
    set "SETORIAL 2" name="SETORIAL 2" mtu=1500 mac-address=00:15:6D:64:B2:56 arp=enabled disable-running-check=no \
    radio-name="POOLTRONIC'S" mode=ap-bridge ssid="TURBONET R-5 A-SETOR 2" area="" frequency-mode=manual-txpower \
    country=no_country_set antenna-gain=0 frequency=2442 band=2.4ghz-b/g scan-list=default rate-set=configured \
    supported-rates-b=5.5Mbps,11Mbps supported-rates-a/g=9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps \
    basic-rates-b=5.5Mbps,11Mbps basic-rates-a/g=24Mbps,36Mbps,48Mbps,54Mbps max-station-count=2007 ack-timeout=90 \
    tx-power=14 tx-power-mode=card-rates noise-floor-threshold=default periodic-calibration=enabled \
    periodic-calibration-interval=60 burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled \
    wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=no update-stats-interval=disabled \
    default-authentication=yes default-forwarding=no default-ap-tx-limit=0 default-client-tx-limit=0 \
    proprietary-extensions=post-2.9.25 hide-ssid=no security-profile="POOL SECURITY CLIENTE" disconnect-timeout=3s \
    on-fail-retry-time=100ms hw-retries=15 preamble-mode=both compression=no allow-sharedkey=no comment="" disabled=no
    / interface wireless nstreme
    set "ZIROK 5.8" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    set "SETORIAL 1" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    set "SETORIAL 2" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    / interface wireless manual-tx-power-table
    set "ZIROK 5.8" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36M\
    bps:17,48Mbps:17,54Mbps:17
    set "SETORIAL 1" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36\
    Mbps:17,48Mbps:17,54Mbps:17
    set "SETORIAL 2" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36\
    Mbps:17,48Mbps:17,54Mbps:17
    / interface wireless security-profiles
    set default name="default" mode=none authentication-types="" unicast-ciphers="" group-ciphers="" wpa-pre-shared-key="" \
    wpa2-pre-shared-key="" eap-methods=passthrough tls-mode=no-certificates tls-certificate=none static-algo-0=none \
    static-key-0="" static-algo-1=none static-key-1="" static-algo-2=none static-key-2="" static-algo-3=none \
    static-key-3="" static-transmit-key=key-0 static-sta-private-algo=none static-sta-private-key="" \
    radius-mac-authentication=no group-key-update=5m
    add name="POOL SECURITY CLIENTE" mode=static-keys-required authentication-types=wpa-psk,wpa2-psk unicast-ciphers=tkip \
    group-ciphers=tkip wpa-pre-shared-key="" wpa2-pre-shared-key="" tls-mode=no-certificates tls-certificate=none \
    static-algo-0=104bit-wep static-key-0="2424AF1406AC73DE4562451874" static-algo-1=none static-key-1="" \
    static-algo-2=none static-key-2="" static-algo-3=none static-key-3="" static-transmit-key=key-0 \
    static-sta-private-algo=none static-sta-private-key="" radius-mac-authentication=no group-key-update=5m
    add name="POOL SECURITY" mode=static-keys-required authentication-types=wpa-psk,wpa2-psk unicast-ciphers=tkip \
    group-ciphers=tkip wpa-pre-shared-key="" wpa2-pre-shared-key="" tls-mode=no-certificates tls-certificate=none \
    static-algo-0=104bit-wep static-key-0="b24f14d33f51c78a11f845212A" static-algo-1=none static-key-1="" \
    static-algo-2=none static-key-2="" static-algo-3=none static-key-3="" static-transmit-key=key-0 \
    static-sta-private-algo=none static-sta-private-key="" radius-mac-authentication=no group-key-update=5m
    / interface wireless wds
    add name="POOL WDS" mtu=1500 arp=enabled disable-running-check=no master-interface="ZIROK 5.8" \
    wds-address=00:02:6F:4B:40:18 comment="" disabled=no
    / interface wireless align
    set frame-size=300 active-mode=yes receive-all=no audio-monitor=00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 ssid-all=no \
    frames-per-second=25 audio-min=-100 audio-max=-20
    / interface wireless access-list
    add mac-address=00:4F:6A:02:E6:78 interface="ZIROK 5.8" authentication=no forwarding=no ap-tx-limit=8 client-tx-limit=8 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:4F:6A:02:E6:78 authentication=no forwarding=no ap-tx-limit=8 client-tx-limit=8 private-algo=none \
    private-key="" comment="" disabled=no
    add mac-address=00:4F:6A:02:E6:78 authentication=no forwarding=no ap-tx-limit=8 client-tx-limit=8 private-algo=none \
    private-key="" comment="" disabled=no
    add mac-address=00:1F:1F:12:3F:78 interface="ZIROK 5.8" authentication=no forwarding=no ap-tx-limit=8 client-tx-limit=8 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:1F:1F:12:3F:78 authentication=no forwarding=no ap-tx-limit=8 client-tx-limit=8 private-algo=none \
    private-key="" comment="" disabled=no
    add mac-address=00:1F:1F:12:3F:78S authentication=no forwarding=no ap-tx-limit=8 client-tx-limit=8 private-algo=none \
    private-key="" comment="" disabled=no
    / interface wireless snooper
    set multiple-channels=yes channel-time=200ms receive-errors=no
    / interface wireless sniffer
    set multiple-channels=no channel-time=200ms only-headers=no receive-errors=no memory-limit=10 file-name="" file-limit=10 \
    streaming-enabled=no streaming-server=0.0.0.0 streaming-max-rate=0


    imagens da configuraçao:

    http://www.turbonetgames.com/xr2/imagem.JPG

    http://www.turbonetgames.com/xr2/imagem2.JPG

    http://www.turbonetgames.com/xr2/imagem3.JPG

    http://www.turbonetgames.com/xr2/imagem4.JPG

    http://www.turbonetgames.com/xr2/imagem5.JPG

    http://www.turbonetgames.com/xr2/imagem6.JPG

  4. Vamos ver se consigo resolver o problema colocando uma routerboard da propria ubiquiti,,,,pq estou vendo q varias pessoas tem o mesmo problema com as router mk junto com o xr2....e acredito q uma router ubiquiti com cartoes ubiquiti funcione melhor.....

    vou testar e posto os resultados,,,,,e se nesse meio tempo alguem puder me ajudar com o mk junto com xr2....vlw mesmo






Tópicos Similares

  1. Respostas: 1
    Último Post: 28-10-2010, 22:59
  2. RGC6 75 Ohms melhor que RGC58 50 Ohms!
    Por cambioco no fórum Redes
    Respostas: 22
    Último Post: 19-09-2007, 21:36
  3. Respostas: 31
    Último Post: 02-10-2006, 12:50
  4. Respostas: 8
    Último Post: 16-09-2006, 20:50
  5. Melhor que amplificador
    Por sergio no fórum Redes
    Respostas: 6
    Último Post: 25-08-2004, 10:31

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L