Problema no FreeRadius + D`link 2100

[gabrielgarcia]

Galera eu fiz um server radus e está dando esse erro na hora de autenticar com o AP .,,
alguem pode me ajudar ?


rad_recv: Access-Request packet from host 192.168.2.50 port 1042, id=0, length=198
Message-Authenticator = 0xf38c7c1b67c64de1873270e3038c3603
Service-Type = Framed-User
User-Name = "gang\000"
Framed-MTU = 1488
Called-Station-Id = "00-1B-11-C8-34-D9:Testing_radius"
Calling-Station-Id = "00-90-4B-9D-F1-10"
NAS-Identifier = "D-Link Access Point"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020000090167616e67
NAS-IP-Address = 192.168.2.50
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "gang", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 0 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.2.50 port 1042
EAP-Message = 0x0101001604106c6b730323bc68dfb61a3a0e8ad9f145
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9362934593639757ebfd9ef20ca49b69
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.50 port 1042, id=0, length=198
Sending duplicate reply to client User/16 port 1042 - ID: 0
Sending Access-Challenge of id 0 to 192.168.2.50 port 1042
Waking up in 2.0 seconds.
Cleaning up request 0 ID 0 with timestamp +89
Ready to process requests.


Thank`s

[armc_2003]

Tenta remover o tipo de autenticação EAP lá no radiusd.conf