Página 4 de 4 PrimeiroPrimeiro 1234
+ Responder ao Tópico



  1. se precisar de mais alguma coisa é só avisar ja estou ficando aperiado .

    /ip firewall nat print
    0 I chain=srcnat action=masquerade out-interface=wan1
    1 chain=srcnat action=masquerade out-interface=wan2adsl
    2 chain=srcnat action=masquerade out-interface=wan3adsl
    3 I chain=srcnat action=masquerade out-interface=wan4adsl

    /ip firewall mangle
    0 ;;; HTTPS FORA DO LOADBALACED
    chain=prerouting action=accept protocol=tcp in-interface=local
    dst-port=443
    1 ;;; FORA DO LOADBALACED
    chain=prerouting action=accept dst-address-list=loopback
    in-interface=local
    2 ;;; Filtro Tracert / Traceroute
    chain=forward action=change-ttl new-ttl=set:30 protocol=icmp
    3 I chain=prerouting action=mark-connection new-connection-mark=wan1_conn
    passthrough=yes in-interface=wan1
    4 chain=prerouting action=mark-connection new-connection-mark=wan2adsl_conn
    passthrough=yes in-interface=wan2adsl
    5 chain=prerouting action=mark-connection new-connection-mark=wan3adsl_conn
    passthrough=yes in-interface=wan3adsl
    6 I chain=prerouting action=mark-connection new-connection-mark=wan4adsl_conn
    passthrough=yes in-interface=wan4adsl

    /ip firewall mangle
    0 ;;; HTTPS FORA DO LOADBALACED
    chain=prerouting action=accept protocol=tcp in-interface=local
    dst-port=443
    1 ;;; FORA DO LOADBALACED
    chain=prerouting action=accept dst-address-list=loopback
    in-interface=local
    2 ;;; Filtro Tracert / Traceroute
    chain=forward action=change-ttl new-ttl=set:30 protocol=icmp
    3 I chain=prerouting action=mark-connection new-connection-mark=wan1_conn
    passthrough=yes in-interface=wan1
    4 chain=prerouting action=mark-connection new-connection-mark=wan2adsl_conn
    passthrough=yes in-interface=wan2adsl
    5 chain=prerouting action=mark-connection new-connection-mark=wan3adsl_conn
    passthrough=yes in-interface=wan3adsl

    6 I chain=prerouting action=mark-connection new-connection-mark=wan4adsl_conn
    passthrough=yes in-interface=wan4adsl

    /ip route
    0 S ;;; Link1
    0.0.0.0/0 unreachable 192.168.200.2 1
    1 A S ;;; Link3
    0.0.0.0/0 reachable wan3adsl 1 wan3adsl
    2 S ;;; Link1
    0.0.0.0/0 unreachable 192.168.200.2 1
    3 A S ;;; Link2
    0.0.0.0/0 reachable wan2adsl 1 wan2adsl
    4 S ;;; Link4
    0.0.0.0/0 unreachable wan4adsl 1
    5 A S ;;; Link2
    0.0.0.0/0 reachable wan2adsl 2 wan2adsl
    6 S ;;; Link3
    0.0.0.0/0 reachable wan3adsl 3 wan3adsl
    7 S ;;; Link4
    0.0.0.0/0 unreachable wan4adsl 4
    8 ADC 192.168.100.0/24 192.168.100.3 0 wan3
    9 ADC 192.168.110.0/24 192.168.110.3 0 wan2
    10 ADC 192.168.254.0/24 192.168.254.2 0 local
    11 ADC 200.217.89.32/32 187.40.222.210 0 wan2adsl
    12 DC 200.217.89.32/32 187.40.219.204 0 wan3adsl

    /ip address>
    192.168.254.2/24 192.168.254.0 192.168.254.255 local
    192.168.200.3/24 192.168.200.0 192.168.200.255 wan1
    2 192.168.100.3/24 192.168.100.0 192.168.100.255 wan3
    3 192.168.110.3/24 192.168.110.0 192.168.110.255 wan2
    4 D 187.40.222.210/32 200.217.89.32 0.0.0.0 wan2adsl
    5 D 187.40.219.204/32 200.217.89.32 0.0.0.0 wan3adsl

  2. rps67 ....

    Ola tem dado certo seu Balance que soma as carga?






Tópicos Similares

  1. Load Balance com Sites de Bancos
    Por thiagotgc no fórum Redes
    Respostas: 19
    Último Post: 29-05-2015, 00:22
  2. Respostas: 1
    Último Post: 19-06-2009, 21:45
  3. Ajuda com msn em load balance
    Por gulinhaster no fórum Redes
    Respostas: 25
    Último Post: 08-12-2008, 10:04
  4. Respostas: 27
    Último Post: 12-07-2008, 15:28
  5. Load Balance Com Problemas Em Bancos
    Por klemensonleal no fórum Redes
    Respostas: 3
    Último Post: 31-05-2007, 03:16

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L