Página 3 de 3 PrimeiroPrimeiro 123
+ Responder ao Tópico



  1. Citação Postado originalmente por White_Tiger
    Qual a configuração pra mim colocar o meu mouse pra funfar a rodinha sendo que ele é um mouse serial?
    ele funciona o resto das funções? se sim soh adiciona as linhas

    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"


    nesse caso jah naum tenhu mta ctz mas tenta ai :good: :good: :good:

    abs t+


    Citação Postado originalmente por PotH
    Affff...

    Como é ruim ser iniciante...Very Happy

    Nem pensei nisso...Valeu cara, vou adicionar isso e ver o que acontece, depois eu posto os resultados!!

    Tks a lot,
    cara o importante eh naum desistir rs* e a gente tah p issu mesmo tds nos ja fomos iniciantes... 8) 8) 8)

  2. #12
    felco
    O meu ta assim:

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "Emulate3Buttons" "true"
    Option "ZAxisMapping" "4 5"
    EndSection

    Mas na opcao "Device" deve ser /dev/mouse nas maioria das distros...



  3. Ae pessoal,

    Obrigado pela ajuda...Mas ta dificil para fazer funcionar, não sei por que...

    Eu peguei o xorg.conf de um colega meu que o mouse ta configurado certinho...coloquei a parte de mouse no meu xorg.conf mas mesmo assim não funcionou...Muito estranho...

    Vou tentar colocar esse do Felco agora...Depois eu vo postar os resultados...

    B1SHOP, pode deixar que perder sim, desistir jamais...

    t+

  4. Pessoal,

    Eu ia postar só a parte do mouse...mas, sei la...eu ja tentei tudo e nada funciona...Alguem pode analizar e me dar um parecer, por favor...

    Ta dificil aqui....

    Agradeço a atenção e compreensão de todos...

    abraços

    # File generated by xf86config.
    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #
    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # **********************************************************************
    # NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
    # driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
    # this out to me.
    # This XF86Config file is designed for use with the VESA framebuffer.
    # This generic interface should work with nearly all video cards
    # (although not every card will support every resolution).
    # With the new driver, it should no longer be required to have frame buffer
    # support in the kernel, or to run it on the console.
    #
    # Enjoy!
    # -- volkerdi@slackware.com
    #
    # **********************************************************************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    # **********************************************************************
    # Input devices
    # **********************************************************************
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    # Some examples of extended input devices
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    # Any number of monitor sections may be present
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    # Any number of graphics device sections may be present
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    Identifier "Simple Layout"
    Screen "Screen 1" 0 0
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #
    # ModulePath can be used to set a search path for the X server modules.
    # The default path is shown here.
    # ModulePath "/usr/X11R6/lib/modules"
    RgbPath "/usr/X11R6/lib/X11/rgb"
    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
    EndSection

    Section "Module"

    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    # This loads the GLX module
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "type1"
    Load "freetype"
    #Load "speedo"
    Load "glx"
    EndSection

    Section "InputDevice"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    # Set the keyboard auto repeat parameters. Not all platforms implement
    # this.
    # Option "AutoRepeat" "500 5"
    # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
    # Option "Xleds" "1 2 3"
    # To disable the XKEYBOARD extension, uncomment XkbDisable.
    # Option "XkbDisable"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a European
    # keyboard, you will probably want to use one of:
    #
    # Option "XkbModel" "pc102"
    # Option "XkbModel" "pc105"
    #
    # If you have a Microsoft Natural keyboard, you can use:
    #
    # Option "XkbModel" "microsoft"
    #
    # If you have a US "windows" keyboard you will want:
    #
    # Option "XkbModel" "pc104"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #
    # Option "XkbLayout" "de"
    #
    # or:
    #
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for X.Org
    #
    # Option "XkbOptions" ""
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "br-abnt2"
    Option "XkbLayout" "br"
    # Option "XkbVariant" ""
    EndSection

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"

    # On platforms where PnP mouse detection is supported the following
    # protocol setting can be used when using a newer PnP mouse:
    # Option "Protocol" "Auto"
    # The available mouse protocols types that you can set below are:
    # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
    # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
    # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
    # ThinkingMouse ThinkingMousePS/2 Xqueue

    Option "Protocol" "IMPS/2"

    # which is usually a symbolic link to the real device.

    Option "Device" "/dev/mouse"
    # Option "Device" "/dev/ttyS0"
    # Option "Device" "/dev/ttyS1"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"

    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    # Baudrate and SampleRate are only for some Logitech mice. In

    EndSection


    Section "Monitor"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "My Monitor"
    HorizSync 31.5 - 50.0
    VertRefresh 40.0 - 90.0
    EndSection

    Section "Device"

    #VideoRam 4096
    # Insert Clocks lines here if appropriate
    Identifier "VESA Framebuffer"
    Driver "vesa"
    EndSection

    Section "Screen"

    # If your card can handle it, a higher default color depth (like 24 or 32)
    # is highly recommended.
    # DefaultDepth 8
    # DefaultDepth 16
    # DefaultDepth 32
    # "1024x768" is also a conservative usable default resolution. If you
    # have a better monitor, feel free to try resolutions such as
    # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
    # card/monitor can produce)
    Identifier "Screen 1"
    Device "VESA Framebuffer"
    Monitor "My Monitor"
    DefaultDepth 24
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection



  5. Dê uma olhada neste link: http://www.slackware-brasil.com.br/w...to.php?aid=145

    Usei e funcionou !!

    :good: :good: :good:

    mtec






Tópicos Similares

  1. Como configurar som e o scroll do mouse no slackware??
    Por c4f0f0 no fórum Servidores de Rede
    Respostas: 1
    Último Post: 27-04-2004, 15:14
  2. configurar scroll do mouse?
    Por no fórum Servidores de Rede
    Respostas: 1
    Último Post: 13-11-2003, 07:23
  3. SCROLL DO MOUSE
    Por Fabinho no fórum Servidores de Rede
    Respostas: 13
    Último Post: 11-04-2003, 23:17
  4. scroll do mouse
    Por Fabinho no fórum Servidores de Rede
    Respostas: 5
    Último Post: 31-12-2002, 01:50
  5. Scroll do mouse
    Por Fabinho no fórum Servidores de Rede
    Respostas: 6
    Último Post: 07-12-2002, 19:09

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L