Ola amigos..
tenho uma rede com 20 pcs .
estou tendo problema com a configuração do SQUID
segue abaixo o SQUID.CONF q uso
##########################
http_port 3129
visible_hostname servidorx-marimba
cache_mem 64 MB
maximum_object_size_in_memory 64 KB
maximum_object_size 750 MB
minimum_object_size 0 KB
cache_swap_low 90
cache_swap_high 95
cache_dir ufs /var/spool/squid 2048 16 256
cache_access_log /var/log/squid/access.log
refresh_pattern ^ftp: 15 20% 2280
refresh_pattern ^gopher: 15 0% 2280
refresh_pattern . 15 20% 2280
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl SSL_ports port 443 563
acl Safe_ports port 21 80 443 563 70 210 280 488 59 777 901 1025-65535
acl purge method PURGE
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl redelocal src 192.168.0.0/24
http_access allow localhost
http_access allow redelocal
http_access deny all
aparentemente tudo OK ...
considerações:
=>IP do eth0 (rede local) é 192.168.0.1
=>as maquinas da rede não estão abrindo paginas de internet
alguma ideia de onde errei?!