+ Responder ao Tópico



  1. Bom dia!

    Estou precisando de uma ajuda para instalar um cartão pcmcia wireless Senao NL2511CD Plus EXT2 no debian...

    Já instalei o wireless-tools, mas o iwconfig me mostra apenas o seguinte:

    debian:/var/log# iwconfig
    lo no wireless extensions.

    eth0 no wireless extensions.

    sit0 no wireless extensions.


    Não sei que interface é essa sit0... Se alguém puder esclarecer...

    Parece que o módulo é carregado, me corrijam caso eu esteja errado:

    debian:/var/log# lsmod
    Module Size Used by
    isofs 32540 0
    udf 73156 0
    snd_pcm_oss 38368 0
    snd_pcm 68676 1 snd_pcm_oss
    snd_timer 20996 1 snd_pcm
    snd_page_alloc 9640 1 snd_pcm
    snd_mixer_oss 15200 1 snd_pcm_oss
    snd 47012 4 snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore 9248 1 snd
    i915 17600 2
    drm 61332 3 i915
    nfs 202828 0
    nfsd 197936 17
    exportfs 5600 1 nfsd
    lockd 54344 3 nfs,nfsd
    nfs_acl 3584 2 nfs,nfsd
    sunrpc 138812 13 nfs,nfsd,lockd,nfs_acl
    nls_iso8859_1 4256 1
    ntfs 192564 1
    ipv6 226016 16
    tsdev 7520 0
    sg 31292 0
    sr_mod 15876 0
    cdrom 32544 1 sr_mod
    psmouse 35016 0
    parport_pc 32132 0
    parport 33256 1 parport_pc
    pcspkr 3072 0
    8139cp 21920 0
    ehci_hcd 28136 0
    uhci_hcd 21164 0
    usbcore 112644 3 ehci_hcd,uhci_hcd
    shpchp 33024 0
    pci_hotplug 28704 1 shpchp
    8139too 25120 0
    mii 5344 2 8139cp,8139too
    yenta_socket 24460 1
    rsrc_nonstatic 11840 1 yenta_socket
    pcmcia_core 36852 2 yenta_socket,rsrc_nonstatic

    i2c_i801 7468 0
    i2c_core 19680 1 i2c_i801
    intel_agp 21148 1
    agpgart 29896 3 drm,intel_agp
    dm_snapshot 15552 0
    dm_mirror 19152 0
    dm_mod 50232 2 dm_snapshot,dm_mirror
    loop 15048 0
    ext3 119240 1
    jbd 52456 1 ext3
    mbcache 8356 1 ext3
    sd_mod 19040 5
    ata_piix 13576 3
    libata 89396 1 ata_piix
    scsi_mod 124168 4 sg,sr_mod,sd_mod,libata
    generic 5476 0 [permanent]
    ide_core 110504 1 generic
    evdev 9088 0
    thermal 13608 0
    processor 28840 1 thermal
    fan 4804 0


    -----------------------------------------

    debian:/var/log# lspcmcia
    Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.0)

    ---------------------------------------------------

    debian:/home/denilson# iwconfig -v
    iwconfig Wireless-Tools version 28
    Compatible with Wireless Extension v11 to v20.

    Kernel Currently compiled with Wireless Extension v20.


    ---------------------------------------------------

    ebian:/home/denilson# lspci
    00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    02:01.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)


    Esta parte do dmesg parece bem interessante:

    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 177
    Yenta: CardBus bridge found at 0000:02:01.0 [1154:030a]
    Yenta: ISA IRQ mask 0x0000, PCI irq 177
    Socket status: 30000810
    Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
    pcmcia: parent PCI bridge I/O window: 0x9000 - 0xafff
    cs: IO port probe 0x9000-0xafff: clean.
    pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe1ffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x42ffffff
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 201
    eth0: RealTek RTL8139 at 0x9000, 00:83:08:01:15:26, IRQ 201
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    pccard: PCMCIA card inserted into slot 0
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000b000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000b400
    usb usb2: configuration #1 chosen from 1 choice
    ...


    Informações do meu sistema:

    Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-24) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat Dec 27 09:31:05 UTC 2008


    Qualquer ajuda será muito bem vinda...

    Obrigado
    Denilson

  2. O chipset deste cartão é o Prism e o driver do mesmo no debian é o linux-wlan-ng.

    Faz um apt-get install linux-wlan-ng

    Para detalhes consulte:

    linux-wlan-ng - Debian Wiki



  3. Valeu, Sérgio!

    Apenas o apt-get install linux-wlan-ng não resolveu completamente... Mas segui os passos descritos no link q vc mandou e funcionou perfeito!

  4. Citação Postado originalmente por denilson_rocha Ver Post
    Valeu, Sérgio!

    Apenas o apt-get install linux-wlan-ng não resolveu completamente... Mas segui os passos descritos no link q vc mandou e funcionou perfeito!

    Blz. Bom que tenha funcionado.






Tópicos Similares

  1. Respostas: 7
    Último Post: 06-12-2007, 10:17
  2. preciso de ajuda para instalar o java ....
    Por andreasn no fórum Servidores de Rede
    Respostas: 42
    Último Post: 13-07-2005, 12:48
  3. Ajuda para instalar o bichano no servidor
    Por Luzumba no fórum Servidores de Rede
    Respostas: 5
    Último Post: 01-07-2005, 09:10
  4. Preciso de ajuda para instalar Kopete 0.82 no mandrake 9.1
    Por fabioi2 no fórum Servidores de Rede
    Respostas: 7
    Último Post: 24-06-2004, 10:26
  5. Ajuda para instalar programas.
    Por meraki no fórum Servidores de Rede
    Respostas: 5
    Último Post: 25-05-2004, 21:40

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L