+ Responder ao Tópico

PCC



  1. Citação Postado originalmente por ElonPJr Ver Post
    André vc conhece o balancedor TP-LINK TL-R488T que vem com 04 wans e 01 lan? vc ja viu ou ouviu falar se presta?
    Meu caro, crie um tópico ou pesquise, agora desvirtuar o tópico com um assunto nada a ver... está desmerecendo quem vem aqui dar dicas sem nada em troca.

  2. Como eu faço pra jogar as portas HTTPS, MSN para um link, pois marquei a porta no mangle com mark routing e em routes indiquei por qual link iria sair mais não deu certo, sempre a alteração de ip, lembrando que coloquei a a regra acima do load no mangle.



  3. poste a regra que criou inteira amigo pra vermos onde esta errando ou a parte do mangle e ip router

  4. Citação Postado originalmente por aprinou Ver Post
    poste a regra que criou inteira amigo pra vermos onde esta errando ou a parte do mangle e ip router
    Segue meu mangle e route...

    /ip firewall mangle
    add action=mark-connection chain=output comment=WINBOX_FULL disabled=no \
    new-connection-mark=WINBOX_FULL passthrough=yes protocol=tcp src-port=\
    8291
    add action=mark-packet chain=output comment="" connection-mark=WINBOX_FULL \
    disabled=no new-packet-mark=Winbox_Full passthrough=no protocol=tcp
    add action=mark-connection chain=output comment=FTP_FULL disabled=no \
    new-connection-mark=FTP_FULL passthrough=yes protocol=tcp src-port=8021
    add action=mark-packet chain=output comment="" connection-mark=FTP_FULL \
    disabled=no new-packet-mark=FTP passthrough=no protocol=tcp
    add action=accept chain=prerouting comment="Mikrotik Brasil" disabled=no \
    dst-address=200.210.70.16 dst-port=80 protocol=tcp
    add action=mark-routing chain=prerouting comment="Paginas Dinamicas" \
    disabled=no dst-port=443 new-routing-mark=https passthrough=no protocol=\
    tcp
    add action=mark-routing chain=prerouting comment="" disabled=no dst-port=1863 \
    new-routing-mark=https passthrough=no protocol=tcp
    add action=mark-routing chain=prerouting comment="" disabled=no dst-port=25 \
    new-routing-mark=https passthrough=no protocol=tcp
    add action=mark-connection chain=input comment=LOAD-PCC connection-state=new \
    disabled=no in-interface=NET-1 new-connection-mark=ether1_conn \
    passthrough=yes
    add action=mark-connection chain=input comment="" connection-state=new \
    disabled=no in-interface=NET-2 new-connection-mark=ether2_conn \
    passthrough=yes
    add action=mark-routing chain=output comment="" connection-mark=ether1_conn \
    connection-state=new disabled=no new-routing-mark=to_ether1 passthrough=\
    no
    add action=mark-routing chain=output comment="" connection-mark=ether2_conn \
    connection-state=new disabled=no new-routing-mark=to_ether2 passthrough=\
    no
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=OUT new-connection-mark=ether1_conn \
    passthrough=yes per-connection-classifier=both-addresses-and-ports:3/0
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=OUT new-connection-mark=ether2_conn \
    passthrough=yes per-connection-classifier=both-addresses-and-ports:3/1
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=OUT new-connection-mark=ether2_conn \
    passthrough=yes per-connection-classifier=both-addresses-and-ports:3/2
    add action=mark-routing chain=prerouting comment="" connection-mark=\
    ether1_conn disabled=no in-interface=OUT new-routing-mark=to_ether1 \
    passthrough=no
    add action=mark-routing chain=prerouting comment="" connection-mark=\
    ether2_conn disabled=no in-interface=OUT new-routing-mark=to_ether2 \
    passthrough=no
    add action=mark-connection chain=prerouting comment=ORKUT_TURBO content=\
    orkut.com disabled=no new-connection-mark=ORKUT passthrough=yes
    add action=mark-connection chain=postrouting comment="" content=orkut.com \
    disabled=no new-connection-mark=ORKUT passthrough=yes
    add action=mark-packet chain=prerouting comment="" connection-mark=ORKUT \
    disabled=no new-packet-mark=ORKUT-PCKT passthrough=no
    add action=mark-packet chain=postrouting comment="" connection-mark=ORKUT \
    disabled=no new-packet-mark=ORKUT-PCKT passthrough=no
    add action=mark-connection chain=prerouting comment=YOUTUBE disabled=no \
    new-connection-mark=YTB passthrough=yes src-address-list=Youtube
    add action=mark-connection chain=postrouting comment="" disabled=no \
    new-connection-mark=YTB passthrough=yes src-address-list=Youtube
    add action=mark-packet chain=prerouting comment="" connection-mark=YTB \
    disabled=no new-packet-mark=youtube passthrough=no
    add action=mark-packet chain=postrouting comment="" connection-mark=YTB \
    disabled=no new-packet-mark=youtube passthrough=no

    /ip route
    add check-gateway=ping comment="" disabled=no distance=1 dst-address=\
    0.0.0.0/0 gateway=NET-2
    add check-gateway=ping comment="" disabled=no distance=1 dst-address=\
    0.0.0.0/0 gateway=NET-2 routing-mark=to_ether2
    add check-gateway=ping comment="" disabled=no distance=1 dst-address=\
    0.0.0.0/0 gateway=NET-1 routing-mark=to_ether1
    add check-gateway=ping comment="" disabled=no distance=1 dst-address=\
    0.0.0.0/0 gateway=NET-1 routing-mark=https
    add check-gateway=ping comment="" disabled=no distance=2 dst-address=\
    0.0.0.0/0 gateway=NET-1



  5. ip firewall mangle

    chain=prerouting protocol=tcp dst-port=443 action=mark-routing new-routing-mark=https passthrough=no

    ip route

    add dst-address=0.0.0.0/0 gateway=ip gateway routing-mark=https


    Coloque acima de todo seu balanceamento no mangle voce poder cuidar dessa saida usando o netwatch...

    Existem varias formas acredito essa uma bem simples pra voce testar...






Tópicos Similares

  1. PCC Balance de 3 a 16 links - Por: M4D3
    Por m4d3 no fórum Redes
    Respostas: 509
    Último Post: 30-05-2016, 12:59
  2. Ajuda PCC Mikrotik
    Por marsilba no fórum Redes
    Respostas: 5
    Último Post: 19-09-2009, 20:32
  3. Problemas depois de implementar PCC
    Por antonoel no fórum Redes
    Respostas: 2
    Último Post: 14-08-2009, 09:57
  4. Lentidão depois do PCC
    Por Evilazio no fórum Redes
    Respostas: 17
    Último Post: 04-08-2009, 22:56
  5. Respostas: 2
    Último Post: 24-07-2009, 19:11

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L