+ Responder ao Tópico



  1. Bom ta ai um tutorial pra quem ta com dificuldades com comfiguração e instalaçao de um Servidor dns+email+ispconfig3. ( Obs. Todo em Ingles + da pra entender! )

    ------------------------------------------------------------------------------------------------------
    TUTORIAL
    --------------------------------------------------------------------------------------------------------
    1 Requirements

    To install such a system you will need the following:



    2 Preliminary Note

    In this tutorial I use the hostname server1.example.com with the IP address 192.168.0.100 and the gateway 192.168.0.1. These settings might differ for you, so you have to replace them where appropriate.

    3 The Base System

    Insert your Ubuntu install CD into your system and boot from it. Select your language:
    Clique na imagem para uma versão maior

Nome:	         1.png
Visualizações:	153
Tamanho: 	42,6 KB
ID:      	15988
    Then select Install Ubuntu Server:
    Clique na imagem para uma versão maior

Nome:	         2.png
Visualizações:	133
Tamanho: 	17,1 KB
ID:      	15989

    Choose your language again (?):

    Clique na imagem para uma versão maior

Nome:	         3.png
Visualizações:	138
Tamanho: 	24,2 KB
ID:      	15990

    Then select your location:

    Clique na imagem para uma versão maior

Nome:	         4.png
Visualizações:	131
Tamanho: 	15,6 KB
ID:      	15991

    Clique na imagem para uma versão maior

Nome:	         5.png
Visualizações:	125
Tamanho: 	13,3 KB
ID:      	15992Clique na imagem para uma versão maior

Nome:	         6.png
Visualizações:	129
Tamanho: 	17,5 KB
ID:      	15993

    Choose a keyboard layout (you will be asked to press a few keys, and the installer will try to detect your keyboard layout based on the keys you pressed):

    Clique na imagem para uma versão maior

Nome:	         7.png
Visualizações:	131
Tamanho: 	12,3 KB
ID:      	15994
    Clique na imagem para uma versão maior

Nome:	         8.png
Visualizações:	141
Tamanho: 	12,4 KB
ID:      	15995

    The installer checks the installation CD, your hardware, and configures the network with DHCP if there is a DHCP server in the network:
    Clique na imagem para uma versão maior

Nome:	         9.png
Visualizações:	121
Tamanho: 	7,4 KB
ID:      	15996Clique na imagem para uma versão maior

Nome:	         10.png
Visualizações:	130
Tamanho: 	7,3 KB
ID:      	15997

    Enter the hostname. In this example, my system is called server1.example.com, so I enter server1:
    Clique na imagem para uma versão maior

Nome:	         11.png
Visualizações:	138
Tamanho: 	14,7 KB
ID:      	15998
    CONTINUA NO PROXIMO POST
    Clique na imagem para uma versão maior

Nome:	         12.png
Visualizações:	136
Tamanho: 	12,0 KB
ID:      	15999Clique na imagem para uma versão maior

Nome:	         12.png
Visualizações:	136
Tamanho: 	12,0 KB
ID:      	15999

    Please check if the installer detected your time zone correctly. If so, select Yes, otherwise No:

    Clique na imagem para uma versão maior

Nome:	         12.png
Visualizações:	136
Tamanho: 	12,0 KB
ID:      	15999

    Now you have to partition your hard disk. For simplicity's sake I select Guided - use entire disk and set up LVM - this will create one volume group with two logical volumes, one for the / file system and another one for swap (of course, the partitioning is totally up to you - if you know what you're doing, you can also set up your partitions manually).
    Clique na imagem para uma versão maior

Nome:	         13.png
Visualizações:	132
Tamanho: 	18,3 KB
ID:      	16000

    Select the disk that you want to partition:
    Clique na imagem para uma versão maior

Nome:	         14.png
Visualizações:	127
Tamanho: 	12,2 KB
ID:      	16001

    When you're asked Write the changes to disks and configure LVM?, select Yes:

    Clique na imagem para uma versão maior

Nome:	         15.png
Visualizações:	127
Tamanho: 	19,5 KB
ID:      	16002

    If you have selected Guided - use entire disk and set up LVM, the partitioner will create one big volume group that uses all the disk space. You can now specify how much of that disk space should be used by the logical volumes for / and swap. It makes sense to leave some space unused so that you can later on expand your existing logical volumes or create new ones - this gives you more flexibility.

    Clique na imagem para uma versão maior

Nome:	         16.png
Visualizações:	122
Tamanho: 	24,3 KB
ID:      	16003

    When you're finished, hit Yes when you're asked Write the changes to disks?:

    Clique na imagem para uma versão maior

Nome:	         17.png
Visualizações:	134
Tamanho: 	18,8 KB
ID:      	16004

    Afterwards, your new partitions are being created and formatted:
    Clique na imagem para uma versão maior

Nome:	         18.png
Visualizações:	121
Tamanho: 	7,7 KB
ID:      	16005

    Now the base system is being installed:
    Clique na imagem para uma versão maior

Nome:	         19.png
Visualizações:	126
Tamanho: 	6,8 KB
ID:      	16006

    Create a user, for example the user Administrator with the user name administrator (don't use the user name admin as it is a reserved name on Ubuntu 10.10):
    Clique na imagem para uma versão maior

Nome:	         20.png
Visualizações:	138
Tamanho: 	16,6 KB
ID:      	16007

    Clique na imagem para uma versão maior

Nome:	         22.png
Visualizações:	133
Tamanho: 	11,9 KB
ID:      	16008Clique na imagem para uma versão maior

Nome:	         23.png
Visualizações:	134
Tamanho: 	10,8 KB
ID:      	16009Clique na imagem para uma versão maior

Nome:	         21.png
Visualizações:	136
Tamanho: 	13,7 KB
ID:      	16010

    I don't need an encrypted private directory, so I choose No here:
    Clique na imagem para uma versão maior

Nome:	         24.png
Visualizações:	133
Tamanho: 	15,1 KB
ID:      	16011

    Next the package manager apt gets configured. Leave the HTTP proxy line empty unless you're using a proxy server to connect to the Internet:
    Clique na imagem para uma versão maior

Nome:	         26.png
Visualizações:	135
Tamanho: 	15,1 KB
ID:      	16012

    Clique na imagem para uma versão maior

Nome:	         26.png
Visualizações:	135
Tamanho: 	15,1 KB
ID:      	16012Clique na imagem para uma versão maior

Nome:	         27.png
Visualizações:	122
Tamanho: 	6,8 KB
ID:      	16013

    I'm a little bit old-fashioned and like to update my servers manually to have more control, therefore I select No automatic updates. Of course, it's up to you what you select here:
    Clique na imagem para uma versão maior

Nome:	         29.png
Visualizações:	131
Tamanho: 	19,7 KB
ID:      	16014

    We need a DNS, mail, and LAMP server, but nevertheless I don't select any of them now because I like to have full control over what gets installed on my system. We will install the needed packages manually later on. The only item I select here is OpenSSH server so that I can immediately connect to the system with an SSH client such as PuTTY after the installation has finished:
    Clique na imagem para uma versão maior

Nome:	         30.png
Visualizações:	138
Tamanho: 	15,9 KB
ID:      	16015
    The installation continues:
    Clique na imagem para uma versão maior

Nome:	         31.png
Visualizações:	126
Tamanho: 	6,9 KB
ID:      	16016
    The GRUB boot loader gets installed:
    Clique na imagem para uma versão maior

Nome:	         32.png
Visualizações:	126
Tamanho: 	6,9 KB
ID:      	16017
    Select Yes when you are asked Install the GRUB boot loader to the master boot record?:
    Clique na imagem para uma versão maior

Nome:	         33.png
Visualizações:	135
Tamanho: 	18,7 KB
ID:      	16018
    The base system installation is now finished. Remove the installation CD from the CD drive and hit Continue to reboot the system:
    Clique na imagem para uma versão maior

Nome:	         34.png
Visualizações:	132
Tamanho: 	13,0 KB
ID:      	16019
    After the reboot you can login with your previously created username (e.g. administrator). Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing
    sudo su
    (You can as well enable the root login by running
    sudo passwd root
    and giving root a password. You can then directly log in as root, but this is frowned upon by the Ubuntu developers and community for various reasons. See Ubuntu Forums.)

    CONTINUA NO PROXIMO POST
    Miniaturas de Anexos Miniaturas de Anexos Clique na imagem para uma versão maior

Nome:	         35.png
Visualizações:	232
Tamanho: 	22,7 KB
ID:      	16020   Clique na imagem para uma versão maior

Nome:	         36.png
Visualizações:	209
Tamanho: 	17,9 KB
ID:      	16021   Clique na imagem para uma versão maior

Nome:	         37.png
Visualizações:	243
Tamanho: 	36,8 KB
ID:      	16022  

  2. PARTE 2


    5 Install The SSH Server (Optional)

    If you did not install the OpenSSH server during the system installation, you can do it now:
    aptitude install ssh openssh-server
    From now on you can use an SSH client such as PuTTY and connect from your workstation to your Ubuntu 10.10 server and follow the remaining steps from this tutorial.

    6 Install vim-nox (Optional)

    I'll use vi as my text editor in this tutorial. The default vi program has some strange behaviour on Ubuntu and Debian; to fix this, we install vim-nox:
    aptitude install vim-nox
    (You don't have to do this if you use a different text editor such as joe or nano.)

    7 Configure The Network

    Because the Ubuntu installer has configured our system to get its network settings via DHCP, we have to change that now because a server should have a static IP address. Edit /etc/network/interfaces and adjust it to your needs (in this example setup I will use the IP address 192.168.0.100):
    vi /etc/network/interfaces
    --------------------------------------------------------------------------------------------

    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).

    # The loopback network interface
    auto lo
    iface lo inet loopback

    # The primary network interface
    auto eth0
    iface eth0 inet static
    address 192.168.0.100
    netmask 255.255.255.0
    network 192.168.0.0
    broadcast 192.168.0.255
    gateway 192.168.0.1

    ---------------------------------------------------------------
    Then restart your network:
    /etc/init.d/networking restart

    Then edit /etc/hosts. Make it look like this:
    vi /etc/hosts
    ----------------------------------------------------------------
    127.0.0.1 localhost.localdomain localhost
    192.168.0.100 server1.example.com server1

    # The following lines are desirable for IPv6 capable hosts
    ::1 localhost ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters

    -------------------------------------------------------


    Now run
    echo server1.example.com > /etc/hostname
    /etc/init.d/hostname restart
    Afterwards, run
    hostname
    hostname -f
    Both should show server1.example.com now.

    8 Edit /etc/apt/sources.list And Update Your Linux Installation

    Edit /etc/apt/sources.list. Comment out or remove the installation CD from the file and make sure that the universe and multiverse repositories are enabled. It should look like this:
    vi /etc/apt/sources.list
    #
    # deb cdrom:[Ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted

    #deb cdrom:[Ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted
    # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
    # newer versions of the distribution.

    deb Index of /ubuntu maverick main restricted
    deb-src Index of /ubuntu maverick main restricted

    ## Major bug fix updates produced after the final release of the
    ## distribution.
    deb Index of /ubuntu maverick-updates main restricted
    deb-src Index of /ubuntu maverick-updates main restricted

    ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
    ## team. Also, please note that software in universe WILL NOT receive any
    ## review or updates from the Ubuntu security team.
    deb Index of /ubuntu maverick universe
    deb-src Index of /ubuntu maverick universe
    deb Index of /ubuntu maverick-updates universe
    deb-src Index of /ubuntu maverick-updates universe

    ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
    ## team, and may not be under a free licence. Please satisfy yourself as to
    ## your rights to use the software. Also, please note that software in
    ## multiverse WILL NOT receive any review or updates from the Ubuntu
    ## security team.
    deb Index of /ubuntu maverick multiverse
    deb-src Index of /ubuntu maverick multiverse
    deb Index of /ubuntu maverick-updates multiverse
    deb-src Index of /ubuntu maverick-updates multiverse

    ## Uncomment the following two lines to add software from the 'backports'
    ## repository.
    ## N.B. software from this repository may not have been tested as
    ## extensively as that contained in the main release, although it includes
    ## newer versions of some applications which may provide useful features.
    ## Also, please note that software in backports WILL NOT receive any review
    ## or updates from the Ubuntu security team.
    # deb Index of /ubuntu maverick-backports main restricted universe multiverse
    # deb-src Index of /ubuntu maverick-backports main restricted universe multiverse

    ## Uncomment the following two lines to add software from Canonical's
    ## 'partner' repository.
    ## This software is not part of Ubuntu, but is offered by Canonical and the
    ## respective vendors as a service to Ubuntu users.
    # deb Index of /ubuntu maverick partner
    # deb-src Index of /ubuntu maverick partner

    ## Uncomment the following two lines to add software from Ubuntu's
    ## 'extras' repository.
    ## This software is not part of Ubuntu, but is offered by third-party
    ## developers who want to ship their latest software.
    # deb Index of /ubuntu maverick main
    # deb-src Index of /ubuntu maverick main

    deb Index of /ubuntu maverick-security main restricted
    deb-src Index of /ubuntu maverick-security main restricted
    deb Index of /ubuntu maverick-security universe
    deb-src Index of /ubuntu maverick-security universe
    deb Index of /ubuntu maverick-security multiverse
    deb-src Index of /ubuntu maverick-security multiverse----------------------------------------------------------

    Then run
    aptitude update
    to update the apt package database and
    aptitude safe-upgrade
    to install the latest updates (if there are any). If you see that a new kernel gets installed as part of the updates, you should reboot the system afterwards:
    reboot

    9 Change The Default Shell

    /bin/sh is a symlink to /bin/dash, however we need /bin/bash, not /bin/dash. Therefore we do this:
    dpkg-reconfigure dash
    Install dash as /bin/sh? <-- No
    If you don't do this, the ISPConfig installation will fail.

    10 Disable AppArmor

    AppArmor is a security extension (similar to SELinux) that should provide extended security. In my opinion you don't need it to configure a secure system, and it usually causes more problems than advantages (think of it after you have done a week of trouble-shooting because some service wasn't working as expected, and then you find out that everything was ok, only AppArmor was causing the problem). Therefore I disable it (this is a must if you want to install ISPConfig later on).
    We can disable it like this:
    /etc/init.d/apparmor stop
    update-rc.d -f apparmor remove
    aptitude remove apparmor apparmor-utils

    11 Synchronize the System Clock

    It is a good idea to synchronize the system clock with an NTP (network time protocol) server over the Internet. Simply run
    aptitude install ntp ntpdate
    and your system time will always be in sync.
    12 Install Postfix, Courier, Saslauthd, MySQL, rkhunter, binutils

    We can install Postfix, Courier, Saslauthd, MySQL, rkhunter, and binutils with a single command:
    aptitude install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl getmail4 rkhunter binutils maildrop
    You will be asked the following questions:
    New password for the MySQL "root" user: <-- yourrootsqlpassword
    Repeat password for the MySQL "root" user: <-- yourrootsqlpassword
    Create directories for web-based administration? <-- No
    General type of mail configuration: <-- Internet Site
    System mail name: <-- server1.example.com
    SSL certificate required <-- Ok
    We want MySQL to listen on all interfaces, not just localhost, therefore we edit /etc/mysql/my.cnf and comment out the line bind-address = 127.0.0.1:
    vi /etc/mysql/my.cnf
    [...]
    # Instead of skip-networking the default is now to listen only on
    # localhost which is more compatible and is not less secure.
    #bind-address = 127.0.0.1
    [...]

    Then we restart MySQL:
    /etc/init.d/mysql restart
    Now check that networking is enabled. Run
    netstat -tap | grep mysql
    The output should look like this:
    root@server1:~# netstat -tap | grep mysql
    tcp 0 0 *:mysql *:* LISTEN 9815/mysqld
    root@server1:~#
    During the installation, the SSL certificates for IMAP-SSL and POP3-SSL are created with the hostname localhost. To change this to the correct hostname (server1.example.com in this tutorial), delete the certificates...
    cd /etc/courier
    rm -f /etc/courier/imapd.pem
    rm -f /etc/courier/pop3d.pem
    ... and modify the following two files; replace CN=localhost with CN=server1.example.com (you can also modify the other values, if necessary):
    vi /etc/courier/imapd.cnf
    [...]
    CN=server1.example.com
    [...]vi /etc/courier/pop3d.cnf

    [...]
    CN=server1.example.com
    [...]

    Then recreate the certificates...
    mkimapdcert
    mkpop3dcert
    ... and restart Courier-IMAP-SSL and Courier-POP3-SSL:
    /etc/init.d/courier-imap-ssl restart
    /etc/init.d/courier-pop-ssl restart



  3. PARTE 3


    13 Install Amavisd-new, SpamAssassin, And Clamav

    To install amavisd-new, SpamAssassin, and ClamAV, we run
    aptitude install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
    14 Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt

    Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, and mcrypt can be installed as follows:
    aptitude install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libapache2-mod-suphp libopenssl-ruby libapache2-mod-ruby
    You will see the following question:
    Web server to reconfigure automatically: <-- apache2
    Configure database for phpmyadmin with dbconfig-common? <-- No
    Then run the following command to enable the Apache modules suexec, rewrite, ssl, actions, and include (plus dav, dav_fs, and auth_digest if you want to use WebDAV):
    a2enmod suexec rewrite ssl actions include
    a2enmod dav_fs dav auth_digest
    Restart Apache afterwards:
    /etc/init.d/apache2 restart

    15 Install PureFTPd And Quota

    PureFTPd and quota can be installed with the following command:
    aptitude install pure-ftpd-common pure-ftpd-mysql quota quotatool
    Edit the file /etc/default/pure-ftpd-common...
    vi /etc/default/pure-ftpd-common
    ... and make sure that the start mode is set to standalone and set VIRTUALCHROOT=true:

    [...]
    STANDALONE_OR_INETD=standalone
    [...]
    VIRTUALCHROOT=true
    [...]

    Now we configure PureFTPd to allow FTP and TLS sessions. FTP is a very insecure protocol because all passwords and all data are transferred in clear text. By using TLS, the whole communication can be encrypted, thus making FTP much more secure.
    If you want to allow FTP and TLS sessions, run
    echo 1 > /etc/pure-ftpd/conf/TLS
    In order to use TLS, we must create an SSL certificate. I create it in /etc/ssl/private/, therefore I create that directory first:
    mkdir -p /etc/ssl/private/
    Afterwards, we can generate the SSL certificate as follows:
    openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/pure-ftpd.pem -out /etc/ssl/private/pure-ftpd.pem
    Country Name (2 letter code) [AU]: <-- Enter your Country Name (e.g., "DE").
    State or Province Name (full name) [Some-State]: <-- Enter your State or Province Name.
    Locality Name (eg, city) []: <-- Enter your City.
    Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- Enter your Organization Name (e.g., the name of your company).
    Organizational Unit Name (eg, section) []: <-- Enter your Organizational Unit Name (e.g. "IT Department").
    Common Name (eg, YOUR name) []: <-- Enter the Fully Qualified Domain Name of the system (e.g. "server1.example.com").
    Email Address []: <-- Enter your Email Address.
    Change the permissions of the SSL certificate:
    chmod 600 /etc/ssl/private/pure-ftpd.pem
    Then restart PureFTPd:
    /etc/init.d/pure-ftpd-mysql restart
    Edit /etc/fstab. Mine looks like this (I added ,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 to the partition with the mount point /):
    vi /etc/fstab
    ----------------------------------------------------------------------

    # /etc/fstab: static file system information.
    #
    # Use 'blkid -o value -s UUID' to print the universally unique identifier
    # for a device; this may be used with UUID= as a more robust way to name
    # devices that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point> <type> <options> <dump> <pass>
    proc /proc proc nodev,noexec,nosuid 0 0
    /dev/mapper/server1-root / ext4 errors=remount-ro,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 0 1
    # /boot was on /dev/sda1 during installation
    UUID=a8f37dcf-5836-485c-a451-3ae2f0f47720 /boot ext2 defaults 0 2
    /dev/mapper/server1-swap_1 none swap sw 0 0
    /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0-------------------------------------------------

    To enable quota, run these commands:
    mount -o remount /
    quotacheck -avugm
    quotaon -avug

    16 Install BIND DNS Server

    BIND can be installed as follows:
    aptitude install bind9 dnsutils

    17 Install Vlogger, Webalizer, And AWstats

    Vlogger, webalizer, and AWstats can be installed as follows:
    aptitude install vlogger webalizer awstats

    18 Install Jailkit

    Jailkit is needed only if you want to chroot SSH users. It can be installed as follows (important: Jailkit must be installed before ISPConfig - it cannot be installed afterwards!):
    aptitude install build-essential autoconf automake1.9 libtool flex bison debhelper
    cd /tmp
    wget http://olivier.sessink.nl/jailkit/jailkit-2.12.tar.gz
    tar xvfz jailkit-2.12.tar.gz
    cd jailkit-2.12
    ./debian/rules binary
    cd ..
    dpkg -i jailkit_2.12-1_*.deb
    rm -rf jailkit-2.12*

    19 Install fail2ban

    This is optional but recommended, because the ISPConfig monitor tries to show the fail2ban log:
    aptitude install fail2ban
    20 Install SquirrelMail

    To install the SquirrelMail webmail client, run
    aptitude install squirrelmail
    Then create the following symlink...
    ln -s /usr/share/squirrelmail/ /var/www/webmail
    ... and configure SquirrelMail:
    squirrelmail-configure
    We must tell SquirrelMail that we are using Courier-IMAP/-POP3:
    SquirrelMail Configuration : Read: config.php (1.4.0)
    ---------------------------------------------------------
    Main Menu --
    1. Organization Preferences
    2. Server Settings
    3. Folder Defaults
    4. General Options
    5. Themes
    6. Address Books
    7. Message of the Day (MOTD)
    8. Plugins
    9. Database
    10. Languages

    D. Set pre-defined settings for specific IMAP servers

    C Turn color on
    S Save data
    Q Quit

    Command >> <-- D


    SquirrelMail Configuration : Read: config.php
    ---------------------------------------------------------
    While we have been building SquirrelMail, we have discovered some
    preferences that work better with some servers that don't work so
    well with others. If you select your IMAP server, this option will
    set some pre-defined settings for that server.

    Please note that you will still need to go through and make sure
    everything is correct. This does not change everything. There are
    only a few settings that this will change.

    Please select your IMAP server:
    bincimap = Binc IMAP server
    courier = Courier IMAP server
    cyrus = Cyrus IMAP server
    dovecot = Dovecot Secure IMAP server
    exchange = Microsoft Exchange IMAP server
    hmailserver = hMailServer
    macosx = Mac OS X Mailserver
    mercury32 = Mercury/32
    uw = University of Washington's IMAP server
    gmail = IMAP access to Google mail (Gmail) accounts

    quit = Do not change anything
    Command >> <-- courier


    SquirrelMail Configuration : Read: config.php
    ---------------------------------------------------------
    While we have been building SquirrelMail, we have discovered some
    preferences that work better with some servers that don't work so
    well with others. If you select your IMAP server, this option will
    set some pre-defined settings for that server.

    Please note that you will still need to go through and make sure
    everything is correct. This does not change everything. There are
    only a few settings that this will change.

    Please select your IMAP server:
    bincimap = Binc IMAP server
    courier = Courier IMAP server
    cyrus = Cyrus IMAP server
    dovecot = Dovecot Secure IMAP server
    exchange = Microsoft Exchange IMAP server
    hmailserver = hMailServer
    macosx = Mac OS X Mailserver
    mercury32 = Mercury/32
    uw = University of Washington's IMAP server

    quit = Do not change anything
    Command >> courier

    imap_server_type = courier
    default_folder_prefix = INBOX.
    trash_folder = Trash
    sent_folder = Sent
    draft_folder = Drafts
    show_prefix_option = false
    default_sub_of_inbox = false
    show_contain_subfolders_option = false
    optional_delimiter = .
    delete_folder = true

    Press any key to continue... <-- ENTER


    SquirrelMail Configuration : Read: config.php (1.4.0)
    ---------------------------------------------------------
    Main Menu --
    1. Organization Preferences
    2. Server Settings
    3. Folder Defaults
    4. General Options
    5. Themes
    6. Address Books
    7. Message of the Day (MOTD)
    8. Plugins
    9. Database
    10. Languages

    D. Set pre-defined settings for specific IMAP servers

    C Turn color on
    S Save data
    Q Quit

    Command >> <-- S


    SquirrelMail Configuration : Read: config.php (1.4.0)
    ---------------------------------------------------------
    Main Menu --
    1. Organization Preferences
    2. Server Settings
    3. Folder Defaults
    4. General Options
    5. Themes
    6. Address Books
    7. Message of the Day (MOTD)
    8. Plugins
    9. Database
    10. Languages

    D. Set pre-defined settings for specific IMAP servers

    C Turn color on
    S Save data
    Q Quit

    Command >> S

    Data saved in config.php
    Press enter to continue... <-- ENTER


    SquirrelMail Configuration : Read: config.php (1.4.0)
    ---------------------------------------------------------
    Main Menu --
    1. Organization Preferences
    2. Server Settings
    3. Folder Defaults
    4. General Options
    5. Themes
    6. Address Books
    7. Message of the Day (MOTD)
    8. Plugins
    9. Database
    10. Languages

  4. PARTE 4

    D. Set pre-defined settings for specific IMAP servers

    C Turn color on
    S Save data
    Q Quit

    Command >> <-- QAfterwards you can access SquirrelMail under http://server1.example.com/webmail or http://192.168.0.100/webmail:

    Clique na imagem para uma versão maior

Nome:	         35.png
Visualizações:	232
Tamanho: 	22,7 KB
ID:      	16020
    21 Install ISPConfig 3

    To install ISPConfig 3 from the latest released version, do this:
    cd /tmp
    wget http://www.ispconfig.org/downloads/I...-stable.tar.gz
    tar xfz ISPConfig-3-stable.tar.gz
    cd ispconfig3_install/install/
    he next step is to run
    php -q install.php
    This will start the ISPConfig 3 installer. The installer will configure all services like Postfix, SASL, Courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary.
    root@server1:/tmp/ispconfig3_install/install# php -q install.php


    --------------------------------------------------------------------------------
    _____ ___________ _____ __ _ ____
    |_ _/ ___| ___ \ / __ \ / _(_) /__ \
    | | \ `--.| |_/ / | / \/ ___ _ __ | |_ _ __ _ _/ /
    | | `--. \ __/ | | / _ \| '_ \| _| |/ _` | |_ |
    _| |_/\__/ / | | \__/\ (_) | | | | | | | (_| | ___\ \
    \___/\____/\_| \____/\___/|_| |_|_| |_|\__, | \____/
    __/ |
    |___/
    --------------------------------------------------------------------------------


    >> Initial configuration

    Operating System: Debian 6.0 (Squeeze/Sid) or compatible

    Following will be a few questions for primary configuration so be careful.
    Default values are in [brackets] and can be accepted with <ENTER>.
    Tap in "quit" (without the quotes) to stop the installer.


    Select language (en,de) [en]: <-- ENTER

    Installation mode (standard,expert) [standard]: <-- ENTER

    Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- ENTER

    MySQL server hostname [localhost]: <-- ENTER

    MySQL root username [root]: <-- ENTER

    MySQL root password []: <-- yourrootsqlpassword

    MySQL database to create [dbispconfig]: <-- ENTER

    MySQL charset [utf8]: <-- ENTER

    Generating a 2048 bit RSA private key
    ......................+++
    .............................................................+++
    writing new private key to 'smtpd.key'
    -----
    You are about to be asked to enter information that will be incorporated
    into your certificate request.
    What you are about to enter is what is called a Distinguished Name or a DN.
    There are quite a few fields but you can leave some blank
    For some fields there will be a default value,
    If you enter '.', the field will be left blank.
    -----
    Country Name (2 letter code) [AU]: <-- ENTER
    State or Province Name (full name) [Some-State]: <-- ENTER
    Locality Name (eg, city) []: <-- ENTER
    Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- ENTER
    Organizational Unit Name (eg, section) []: <-- ENTER
    Common Name (eg, YOUR name) []: <-- ENTER
    Email Address []: <-- ENTER
    Configuring Jailkit
    Configuring SASL
    Configuring PAM
    Configuring Courier
    Configuring Spamassassin
    Configuring Amavisd
    Configuring Getmail
    Configuring Pureftpd
    Configuring BIND
    Configuring Apache
    Configuring Vlogger
    Configuring Apps vhost
    Configuring Firewall
    Installing ISPConfig
    ISPConfig Port [8080]: <-- ENTER

    Configuring DBServer
    Installing ISPConfig crontab
    no crontab for root
    no crontab for getmail
    Restarting services ...
    Rather than invoking init scripts through /etc/init.d, use the service(8)
    utility, e.g. service mysql restart

    Since the script you are attempting to invoke has been converted to an
    Upstart job, you may also use the restart(8) utility, e.g. restart mysql
    mysql start/running, process 25572
    * Stopping Postfix Mail Transport Agent postfix
    ...done.
    * Starting Postfix Mail Transport Agent postfix
    ...done.
    * Stopping SASL Authentication Daemon saslauthd
    ...done.
    * Starting SASL Authentication Daemon saslauthd
    ...done.
    Stopping amavisd: amavisd-new.
    Starting amavisd: amavisd-new.
    * Stopping ClamAV daemon clamd
    ...done.
    * Starting ClamAV daemon clamd
    ...done.
    * Stopping Courier authentication services authdaemond
    ...done.
    * Starting Courier authentication services authdaemond
    ...done.
    * Stopping Courier IMAP server imapd
    ...done.
    * Starting Courier IMAP server imapd
    ...done.
    * Stopping Courier IMAP-SSL server imapd-ssl
    ...done.
    * Starting Courier IMAP-SSL server imapd-ssl
    ...done.
    * Stopping Courier POP3 server...
    ...done.
    * Starting Courier POP3 server...
    ...done.
    * Stopping Courier POP3-SSL server...
    ...done.
    * Starting Courier POP3-SSL server...
    ...done.
    * Restarting web server apache2
    ... waiting ............. ...done.
    Restarting ftp server: Running: /usr/sbin/pure-ftpd-mysql-virtualchroot -l mysql:/etc/pure-ftpd/db/mysql.conf -l pam -O clf:/var/log/pure-ftpd/transfer.log -D -H -b -A -Y 1 -u 1000 -8 UTF-8 -E -B
    Installation completed.
    root@server1:/tmp/ispconfig3_install/install#
    The installer automatically configures all underlying services, so no manual configuration is needed.
    Afterwards you can access ISPConfig 3 under http://server1.example.com:8080/ or http://192.168.0.100:8080/. Log in with the username admin and the password admin (you should change the default password after your first login):
    Clique na imagem para uma versão maior

Nome:	         36.png
Visualizações:	209
Tamanho: 	17,9 KB
ID:      	16021Clique na imagem para uma versão maior

Nome:	         37.png
Visualizações:	243
Tamanho: 	36,8 KB
ID:      	16022
    The system is now ready to be used.



    BOM É ISSO AI.. ESPERO QUE AJUDE A TODOS.http://static1.under-linux.net/images/smilies/proud.gif



  5. Legal amigo, muita gente vai se beneficiar de sua postagem, Abraços.






Tópicos Similares

  1. QUANTO COBRAR PARA INSTALAÇÃO DE SERVIDORES
    Por evotecnologia no fórum Servidores de Rede
    Respostas: 12
    Último Post: 08-02-2012, 13:27
  2. Rede interna lenta após instalação de Servidor Proxy Squid
    Por m0rpheu5 no fórum Servidores de Rede
    Respostas: 5
    Último Post: 25-08-2011, 09:53
  3. livro sobre instalação de servidor de email
    Por ualex no fórum Servidores de Rede
    Respostas: 2
    Último Post: 24-01-2007, 09:24
  4. Instalação de Servidor Linux
    Por elderjmp no fórum Servidores de Rede
    Respostas: 3
    Último Post: 18-12-2005, 19:15
  5. Instalação de Servidor, várias questões
    Por MarcioRM no fórum Servidores de Rede
    Respostas: 5
    Último Post: 01-10-2004, 09:19

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L