+ Responder ao Tópico



  1. Opa...
    Galera eu to pensando em instalar guentoo mas eu queria saber como identicar no kernel, na hora de ativar os modulos, o que eu preciso para que funcione bem entendeu... segue meu lspci


    root@laptop:/etc# lspci
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
    04:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)


    Se alguem puder me ajudar !!!
    grato desde ja

  2. Utilize o mesmo comando assim:

    # lspci -v

    Na última linha de informação de cada dispositivo, você encontrará uma linha que te dirá qual módulo usar: "Kernel modules".






Tópicos Similares

  1. Como identificar qual o nome da porta que está o modem usb no Debian?
    Por victortassinari no fórum Sistemas Operacionais
    Respostas: 4
    Último Post: 04-04-2017, 10:08
  2. Como ativar o Diskd no Kernel do Slackware
    Por netobarros no fórum Servidores de Rede
    Respostas: 4
    Último Post: 15-08-2007, 00:26
  3. Como fazer patch no kernel
    Por nataniel no fórum Servidores de Rede
    Respostas: 0
    Último Post: 26-09-2005, 10:22
  4. Como configurar teclado no X
    Por no fórum Servidores de Rede
    Respostas: 9
    Último Post: 02-12-2002, 23:36
  5. Como cadastrtar estaçoes no meu DNS
    Por Wins no fórum Servidores de Rede
    Respostas: 3
    Último Post: 12-10-2002, 15:38

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L