+ Responder ao Tópico



  1. Olá a todos! Estou fazendo uma total migração para o Linux, pois estou usando meu notebook apenas para estudo Front-End Web. Enfim, troquei o Windows pelo Ubuntu 14.04, já instalei alguns programas(GIMP, Atom, Inskcape, qBittorrent e VMware Player 12) além de instalar o TLP para gerenciar energia. Meu problema que mesmo não executando nada, a previsão de autonomia da bateria é de 1h30min. Já pesquisei sobre o assunto, mas basicamente só há posts para a instalação/desinstalação do TLP. A matéria que usei para instalar o TLP é esta:
    http://www.linuxdescomplicado.com.br...onsumo-da.html


    A configuração do meu notebook segue com o status do TLP stat:
    Código :
    --- TLP 0.8 --------------------------------------------
     
     
    +++ Configured Settings: /etc/default/tlp
    TLP_ENABLE=1
    TLP_DEFAULT_MODE=AC
    DISK_IDLE_SECS_ON_AC=0
    DISK_IDLE_SECS_ON_BAT=2
    MAX_LOST_WORK_SECS_ON_AC=15
    MAX_LOST_WORK_SECS_ON_BAT=60
    SCHED_POWERSAVE_ON_AC=0
    SCHED_POWERSAVE_ON_BAT=1
    NMI_WATCHDOG=0
    ENERGY_PERF_POLICY_ON_AC=performance
    ENERGY_PERF_POLICY_ON_BAT=powersave
    DISK_DEVICES="sda sdb"
    DISK_APM_LEVEL_ON_AC="254 254"
    DISK_APM_LEVEL_ON_BAT="128 128"
    SATA_LINKPWR_ON_AC=max_performance
    SATA_LINKPWR_ON_BAT=min_power
    PCIE_ASPM_ON_AC=performance
    PCIE_ASPM_ON_BAT=powersave
    RADEON_POWER_PROFILE_ON_AC=high
    RADEON_POWER_PROFILE_ON_BAT=low
    RADEON_DPM_STATE_ON_AC=performance
    RADEON_DPM_STATE_ON_BAT=battery
    RADEON_DPM_PERF_LEVEL_ON_AC=auto
    RADEON_DPM_PERF_LEVEL_ON_BAT=auto
    WIFI_PWR_ON_AC=1
    WIFI_PWR_ON_BAT=5
    WOL_DISABLE=Y
    SOUND_POWER_SAVE_ON_AC=0
    SOUND_POWER_SAVE_ON_BAT=1
    SOUND_POWER_SAVE_CONTROLLER=Y
    BAY_POWEROFF_ON_BAT=0
    BAY_DEVICE="sr0"
    RUNTIME_PM_ON_AC=on
    RUNTIME_PM_ON_BAT=auto
    RUNTIME_PM_ALL=1
    RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
    USB_AUTOSUSPEND=1
    USB_BLACKLIST_WWAN=1
    RESTORE_DEVICE_STATE_ON_STARTUP=0
     
     
    +++ System Info
    System         = ASUSTeK COMPUTER INC. 1.0 K45VM
    BIOS           = 224
    Release        = Ubuntu 14.04.3 LTS
    Kernel         = 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64
    /proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=5d0e8b2d-b104-4113-81a0-d4972cfeaad1 ro quiet splash vt.handoff=7
    Init system    = upstart
     
     
    +++ System Status
    TLP power save = enabled
    power source   = AC
     
     
    +++ Processor
    CPU Model      = Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
     
     
    /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu4/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu5/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu5/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu5/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu5/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu6/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu6/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu6/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu6/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/cpu7/cpufreq/scaling_driver    = intel_pstate
    /sys/devices/system/cpu/cpu7/cpufreq/scaling_governor  = powersave
    /sys/devices/system/cpu/cpu7/cpufreq/scaling_min_freq  =  1200000 [kHz]
    /sys/devices/system/cpu/cpu7/cpufreq/scaling_max_freq  =  3300000 [kHz]
     
     
    /sys/devices/system/cpu/intel_pstate/min_perf_pct      = 36
    /sys/devices/system/cpu/intel_pstate/max_perf_pct      = 100
    /sys/devices/system/cpu/intel_pstate/no_turbo          = 0
     
     
    x86_energy_perf_policy.cpu0                            = performance
    x86_energy_perf_policy.cpu1                            = performance
    x86_energy_perf_policy.cpu2                            = performance
    x86_energy_perf_policy.cpu3                            = performance
    x86_energy_perf_policy.cpu4                            = performance
    x86_energy_perf_policy.cpu5                            = performance
    x86_energy_perf_policy.cpu6                            = performance
    x86_energy_perf_policy.cpu7                            = performance
     
     
    /proc/sys/kernel/nmi_watchdog                          = 0
     
     
    +++ Undervolting
    PHC kernel not available.
     
     
    +++ Temperatures
    CPU temp               =    54 [°C]
    Fan speed              = (not available)
     
     
    +++ File System
    /proc/sys/vm/laptop_mode               =     0
    /proc/sys/vm/dirty_writeback_centisecs =  1500
    /proc/sys/vm/dirty_expire_centisecs    =  1500
    /proc/sys/vm/dirty_ratio               =    20
    /proc/sys/vm/dirty_background_ratio    =    10
    /proc/sys/fs/xfs/age_buffer_centisecs  = (not available)
    /proc/sys/fs/xfs/xfssyncd_centisecs    = (not available)
    /proc/sys/fs/xfs/xfsbufd_centisecs     = (not available)
     
     
    +++ Storage Devices
    /dev/sda:
              Model     = TOSHIBA MQ01ABD050                      
              Firmware  = AX002J  
              APM Level = 254
              Status    = active/idle
              Scheduler = deadline
     
     
            SMART info:
                4 Start_Stop_Count          =     4016 
                5 Reallocated_Sector_Ct     =        0 
                9 Power_On_Hours            =     7884 [h]
              193 Load_Cycle_Count          =    24011 
              194 Temperature_Celsius       =       35 (Min/Max 19/60)  [°C]
     
     
     
     
    +++ SATA Aggressive Link Power Management
    /sys/class/scsi_host/host0/link_power_management_policy  = max_performance
    /sys/class/scsi_host/host1/link_power_management_policy  = max_performance
    /sys/class/scsi_host/host2/link_power_management_policy  = max_performance
    /sys/class/scsi_host/host3/link_power_management_policy  = max_performance
    /sys/class/scsi_host/host4/link_power_management_policy  = max_performance
    /sys/class/scsi_host/host5/link_power_management_policy  = max_performance
     
     
    +++ PCIe Active State Power Management
    /sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
     
     
    +++ Intel Graphics
    /sys/module/i915/parameters/powersave        =  1 (enabled)
    /sys/module/i915/parameters/enable_rc6       =  3 (enabled + deep)
    /sys/module/i915/parameters/enable_fbc       = -1 (use per-chip default)
    /sys/module/i915/parameters/lvds_downclock   =  0 (disabled)
    /sys/module/i915/parameters/semaphores       = -1 (use per-chip default)
     
     
    +++ Wireless
    bluetooth = none (no device)
    wifi      = on
    wwan      = none (no device)
     
     
    wlan0(ath9k)        : connected, power management = off
     
     
    +++ Audio
    /sys/module/snd_hda_intel/parameters/power_save            = 0
    /sys/module/snd_hda_intel/parameters/power_save_controller = N
     
     
    +++ Runtime Power Management
    device classes   = all
    device blacklist = (not configured)
    driver blacklist = radeon nouveau
     
     
    /sys/bus/pci/devices/0000:00:00.0/power/control = on   (0x060000, Host bridge, ivb_uncore)
    /sys/bus/pci/devices/0000:00:01.0/power/control = on   (0x060400, PCI bridge, pcieport)
    /sys/bus/pci/devices/0000:00:02.0/power/control = on   (0x030000, VGA compatible controller, i915)
    /sys/bus/pci/devices/0000:00:14.0/power/control = on   (0x0c0330, USB controller, xhci_hcd)
    /sys/bus/pci/devices/0000:00:16.0/power/control = on   (0x078000, Communication controller, mei_me)
    /sys/bus/pci/devices/0000:00:1a.0/power/control = on   (0x0c0320, USB controller, ehci-pci)
    /sys/bus/pci/devices/0000:00:1b.0/power/control = on   (0x040300, Audio device, snd_hda_intel)
    /sys/bus/pci/devices/0000:00:1c.0/power/control = on   (0x060400, PCI bridge, pcieport)
    /sys/bus/pci/devices/0000:00:1c.1/power/control = on   (0x060400, PCI bridge, pcieport)
    /sys/bus/pci/devices/0000:00:1d.0/power/control = on   (0x0c0320, USB controller, ehci-pci)
    /sys/bus/pci/devices/0000:00:1f.0/power/control = on   (0x060100, ISA bridge, lpc_ich)
    /sys/bus/pci/devices/0000:00:1f.2/power/control = on   (0x010601, SATA controller, ahci)
    /sys/bus/pci/devices/0000:00:1f.3/power/control = on   (0x0c0500, SMBus, no driver)
    /sys/bus/pci/devices/0000:01:00.0/power/control = on   (0x030000, VGA compatible controller, nvidia)
    /sys/bus/pci/devices/0000:02:00.0/power/control = on   (0x020000, Ethernet controller, r8169)
    /sys/bus/pci/devices/0000:03:00.0/power/control = on   (0x028000, Network controller, ath9k)
     
     
    +++ USB
    autosuspend        = enabled
    device whitelist   = (not configured)
    device blacklist   = (not configured)
    wwan blacklist     = enabled
     
     
    Bus 004 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms =     0 -- Intel Corp. Integrated Rate Matching Hub (hub)
    Bus 004 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)
    Bus 003 Device 003 ID 1bcf:2883 control = auto, autosuspend_delay_ms =  2000 -- Sunplus Innovation Technology Inc.  (uvcvideo)
    Bus 003 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms =     0 -- Intel Corp. Integrated Rate Matching Hub (hub)
    Bus 003 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)
    Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 3.0 root hub (hub)
    Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)
     
     
    +++ Battery Status
    /sys/class/power_supply/BAT1/manufacturer                   = COMPAL 
    /sys/class/power_supply/BAT1/model_name                     = PABAS0241231
    /sys/class/power_supply/BAT1/cycle_count                    = (not supported)
    /sys/class/power_supply/BAT1/charge_full_design             =   4700 [mAh]
    /sys/class/power_supply/BAT1/charge_full                    =   2740 [mAh]
    /sys/class/power_supply/BAT1/charge_now                     =   2023 [mAh]
    /sys/class/power_supply/BAT1/current_now                    =   1519 [mA]
    /sys/class/power_supply/BAT1/status                         = Charging

    Alguém poderia dar alguma dica? Desde já muito obrigado!
    Última edição por ab5x2; 08-10-2015 às 11:35.






Tópicos Similares

  1. Respostas: 10
    Último Post: 02-04-2016, 20:02
  2. Passar cabo com fio de energia
    Por william no fórum Redes
    Respostas: 17
    Último Post: 05-11-2010, 00:05
  3. laptop com baixa taixa de velocidade na internet
    Por Transistor no fórum Sistemas Operacionais
    Respostas: 0
    Último Post: 20-09-2010, 23:11
  4. Duvida p/ Configurar Ubuntu Server com 2 placas de Rede e ppp0
    Por Rhoux no fórum Sistemas Operacionais
    Respostas: 4
    Último Post: 02-12-2008, 17:31
  5. Problemas com a placa de rede no Ubuntu
    Por morronix no fórum Sistemas Operacionais
    Respostas: 3
    Último Post: 12-12-2005, 16:47

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L