problema com VSFTPD - ñ acessa mais

[jhaga]

meu servidor de FTP não está mais rodando...
dou os seguintes comandos:
# ftp localhost
ftp: connect: Connection refused
e
# service vsftpd status
%{base} morto mas o subsistema está trancado

alguém poderia me ajudar nesse caso.

Estou começando a mexer com linux e estou encontrando essa dificuldade.

Jhaga

[WILSOM]

Jovem

Se vc sabe já souber a solução deste problema, favor me reportar, pois estou com o mesmo problema.

ABRAÇO
[email protected]

[CFRInformatica]

Qual dsitro vc usa?

[xstefanox]

Começou bem. Andei testando o VSFTPD e eu achei incrível a facilidade que ele trabalha. Embora ele seja um pouco mais simples do que o WU-FTPD e o PROFTPD, é extremamente seguro e não roda por meio do XINETD ou INETD (Se tu quiser, tu roda, mas ele roda como daemon...). Sem falar que ele é muito mais fácil de trabalhar do que os outros servidores.

Enfim, chega de lero-lero.

Tente iniciar o serviço com um:

# tail -f /var/log/vsftpd.log

Rodando...


Abraços!

[LinKe]

ola,

estou tendo o mesmo problema com o vsftpd, ja tentei dar o comando #tail citado acima porem ele não acha o Log.

o q pode estar ocorrendo?

irei postar a configuração do meu vsftpd.conf aqui:

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
#numero de conexões simutaneas
max_clients=10

#Numeros de Ip simutaneos
max_per_ip=7

#permite login de usuarios sem entrada no /etc/password
guest_enable=YES

#Virtual users permition
virtual_use_local_priv=YES

# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
xferlog_enable=YES
#Diret
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
idle_session_timeout=40
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
data_connection_timeout=60

# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES



# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
ftpd_banner=Bem Vindo ao FTP da WK3 Tecnologia

# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
chroot_local_user=NO

# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES

pam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES
listen_port=21
listen_port=20

#diretorio inicial
local_root=


Uso o Linux Fedora Core só para constar.

Obrigado,
Bruno.