+ Responder ao Tópico



  1. #61
    robsonzornitta
    Visitante

    Padrão outra perhunta!!

    kr pode ser besteira minha mas c tah fazendu tudu issu no bind como root?

    pelo que eu vih ai em cima naum a naum ser que tu deu privilégio para o usuário sysop como root tbm ai sim mas vc tah utilizando superusuários pra fazeh issu?

  2. #62
    Geraldo
    Visitante

    Padrão sis 648 / 963

    Citação Postado originalmente por jrctec
    no /var/log/messages tá assim:

    May 12 07:40:02 caught syslogd 1.4.1: restart.
    May 12 07:40:02 caught syslog: syslogd startup succeeded
    May 12 07:40:02 caught kernel: klogd 1.4.1, log source = /proc/kmsg started.
    May 12 07:40:02 caught kernel: Inspecting /boot/System.map-2.6.5-63077cl
    May 12 07:40:02 caught syslog: klogd startup succeeded
    May 12 07:40:02 caught kernel: Loaded 29534 symbols from /boot/System.map-2.6.5-63077cl.
    May 12 07:40:02 caught kernel: Symbols match kernel version 2.6.5.
    May 12 07:40:02 caught kernel: No module symbols loaded - kernel modules not enabled.
    May 12 07:40:02 caught kernel: Linux version 2.6.5-63077cl ([email protected]) (gcc version 3.3.3 (release)) #1 Thu Jun 17 20:05:07 BRT 2004
    May 12 07:40:02 caught kernel: BIOS-provided physical RAM map:
    May 12 07:40:02 caught kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    May 12 07:40:02 caught kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    May 12 07:40:02 caught kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    May 12 07:40:02 caught kernel: BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
    May 12 07:40:02 caught kernel: BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
    May 12 07:40:02 caught kernel: BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
    May 12 07:40:02 caught kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    May 12 07:40:02 caught kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    May 12 07:40:02 caught kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    May 12 07:40:02 caught kernel: Warning only 896MB will be used.
    May 12 07:40:02 caught kernel: Use a HIGHMEM enabled kernel.
    May 12 07:40:02 caught kernel: 896MB LOWMEM available.
    May 12 07:40:02 caught kernel: On node 0 totalpages: 229376
    May 12 07:40:02 caught kernel: DMA zone: 4096 pages, LIFO batch:1
    May 12 07:40:02 caught kernel: Normal zone: 225280 pages, LIFO batch:16
    May 12 07:40:02 caught kernel: HighMem zone: 0 pages, LIFO batch:1
    May 12 07:40:02 caught kernel: DMI 2.3 present.
    May 12 07:40:02 caught kernel: ACPI: RSDP (v000 ASUS ) @ 0x000f5710
    May 12 07:40:02 caught kernel: ACPI: RSDT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
    May 12 07:40:02 caught kernel: ACPI: FADT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc0c0
    May 12 07:40:02 caught kernel: ACPI: BOOT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
    May 12 07:40:02 caught kernel: ACPI: MADT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
    May 12 07:40:02 caught kernel: ACPI: DSDT (v001 ASUS P4S800 0x00001000 MSFT 0x0100000b) @ 0x00000000
    May 12 07:40:02 caught kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    May 12 07:40:02 caught kernel: Processor #0 15:3 APIC version 20
    May 12 07:40:02 caught kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    May 12 07:40:02 caught kernel: Processor #1 15:3 APIC version 20
    May 12 07:40:02 caught kernel: WARNING: NR_CPUS limit of 1 reached. Processor ignored.
    May 12 07:40:02 caught kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    May 12 07:40:02 caught kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    May 12 07:40:02 caught kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    May 12 07:40:02 caught kernel: IOAPIC[0]: Assigned apic_id 2
    May 12 07:40:02 caught kernel: IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
    May 12 07:40:02 caught kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
    May 12 07:40:02 caught kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
    May 12 07:40:02 caught kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    May 12 07:40:02 caught kernel: Using ACPI (MADT) for SMP configuration information
    May 12 07:40:02 caught kernel: Built 1 zonelists
    May 12 07:40:02 caught kernel: Kernel command line: root=/dev/hda1 vga=0x317 splash=silent 5
    May 12 07:40:02 caught random: Iniciando gerador de números aleatórios: succeeded
    May 12 07:40:02 caught kernel: bootsplash: silent mode.
    May 12 07:40:02 caught kernel: Initializing CPU#0
    May 12 07:40:02 caught kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
    May 12 07:40:02 caught kernel: Detected 3000.173 MHz processor.
    May 12 07:40:02 caught kernel: Using tsc for high-res timesource
    May 12 07:40:02 caught kernel: Console: colour dummy device 80x25
    May 12 07:40:02 caught kernel: Memory: 903988k/917504k available (1768k kernel code, 12756k reserved, 876k data, 312k init, 0k highmem)
    May 12 07:40:02 caught kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
    May 12 07:40:02 caught kernel: Calibrating delay loop... 5931.00 BogoMIPS
    May 12 07:40:02 caught kernel: Security Scaffold v1.0.0 initialized
    May 12 07:40:02 caught kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    May 12 07:40:02 caught kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    May 12 07:40:02 caught kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    May 12 07:40:02 caught kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    May 12 07:40:02 caught kernel: Freeing initrd memory: 435k freed
    May 12 07:40:02 caught kernel: monitor/mwait feature present.
    May 12 07:40:02 caught kernel: using mwait in idle threads.
    May 12 07:40:02 caught kernel: CPU: Trace cache: 12K uops
    May 12 07:40:02 caught kernel: CPU: L2 cache: 1024K
    May 12 07:40:02 caught kernel: Intel machine check architecture supported.
    May 12 07:40:02 caught kernel: Intel machine check reporting enabled on CPU#0.
    May 12 07:40:02 caught kernel: CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
    May 12 07:40:02 caught kernel: CPU#0: Thermal monitoring enabled
    May 12 07:40:02 caught kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
    May 12 07:40:02 caught kernel: Enabling fast FPU save and restore... done.
    May 12 07:40:02 caught kernel: Enabling unmasked SIMD FPU exception support... done.
    May 12 07:40:02 caught kernel: Checking 'hlt' instruction... OK.
    May 12 07:40:02 caught kernel: POSIX conformance testing by UNIFIX
    May 12 07:40:02 caught kernel: enabled ExtINT on CPU#0
    May 12 07:40:02 caught kernel: ESR value before enabling vector: 00000000
    May 12 07:40:02 caught kernel: ESR value after enabling vector: 00000000
    May 12 07:40:02 caught kernel: ENABLING IO-APIC IRQs
    May 12 07:40:02 caught kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
    May 12 07:40:02 caught kernel: Using local APIC timer interrupts.
    May 12 07:40:02 caught kernel: calibrating APIC timer ...
    May 12 07:40:02 caught kernel: ..... CPU clock speed is 2999.0583 MHz.
    May 12 07:40:02 caught kernel: ..... host bus clock speed is 199.0972 MHz.
    May 12 07:40:02 caught kernel: NET: Registered protocol family 16
    May 12 07:40:02 caught kernel: EISA bus registered
    May 12 07:40:02 caught kernel: PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
    May 12 07:40:02 caught kernel: PCI: Using configuration type 1
    May 12 07:40:02 caught kernel: mtrr: v2.0 (20020519)
    May 12 07:40:02 caught kernel: ACPI: Subsystem revision 20040326
    May 12 07:40:02 caught kernel: ACPI: Interpreter enabled
    May 12 07:40:02 caught kernel: ACPI: Using IOAPIC for interrupt routing
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
    May 12 07:40:02 caught kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    May 12 07:40:02 caught kernel: PCI: Probing PCI hardware (bus 00)
    May 12 07:40:02 caught kernel: Enabling SiS 96x SMBus.
    May 12 07:40:02 caught kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
    May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver usbfs
    May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver hub
    May 12 07:40:02 caught kernel: testing the IO APIC.......................
    May 12 07:40:02 caught kernel: .................................... done.
    May 12 07:40:02 caught kernel: PCI: Using ACPI for IRQ routing
    May 12 07:40:02 caught kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
    May 12 07:40:02 caught kernel: vesafb: framebuffer at 0xfc000000, mapped to 0xf8809000, size 4096k
    May 12 07:40:02 caught kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=0
    May 12 07:40:02 caught kernel: vesafb: protected mode interface info at c000:0336
    May 12 07:40:02 caught kernel: vesafb: scrolling: redraw
    May 12 07:40:02 caught kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    May 12 07:40:02 caught kernel: fb0: VESA VGA frame buffer device
    May 12 07:40:02 caught kernel: Simple Boot Flag at 0x3a set to 0x1
    May 12 07:40:02 caught kernel: Machine check exception polling timer started.
    May 12 07:40:02 caught kernel: Total HugeTLB memory allocated, 0
    May 12 07:40:02 caught kernel: ikconfig 0.7 with /proc/config*
    May 12 07:40:02 caught kernel: VFS: Disk quotas dquot_6.5.1
    May 12 07:40:02 caught kernel: Initializing Cryptographic API
    May 12 07:40:02 caught kernel: isapnp: Scanning for PnP cards...
    May 12 07:40:02 caught kernel: isapnp: No Plug & Play device found
    May 12 07:40:02 caught kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 23674 bytes, found (1024x768, 18444 bytes, v3).
    May 12 07:40:02 caught kernel: Console: switching to colour frame buffer device 128x38
    May 12 07:40:02 caught kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
    May 12 07:40:02 caught kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    May 12 07:40:02 caught kernel: Using anticipatory io scheduler
    May 12 07:40:02 caught kernel: Floppy drive(s): fd0 is 1.44M
    May 12 07:40:02 caught kernel: FDC 0 is a post-1991 82077
    May 12 07:40:02 caught kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    May 12 07:40:02 caught kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    May 12 07:40:02 caught kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    May 12 07:40:02 caught kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
    May 12 07:40:02 caught kernel: SIS5513: chipset revision 0
    May 12 07:40:02 caught kernel: SIS5513: not 100%% native mode: will probe irqs later
    May 12 07:40:02 caught kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    May 12 07:40:02 caught kernel: ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hdaMA, hdbio
    May 12 07:40:02 caught kernel: ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdcMA, hddMA
    May 12 07:40:02 caught kernel: hda: Maxtor 6Y120L0, ATA DISK drive
    May 12 07:40:02 caught kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    May 12 07:40:02 caught kernel: hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
    May 12 07:40:02 caught kernel: hdd: ATAPI-CD ROM-DRIVE-56MAX, ATAPI CD/DVD-ROM drive
    May 12 07:40:02 caught kernel: ide1 at 0x170-0x177,0x376 on irq 15
    May 12 07:40:02 caught kernel: hda: max request size: 128KiB
    May 12 07:40:02 caught kernel: hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
    May 12 07:40:02 caught kernel: hda: hda1 hda2
    May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
    May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.0: irq 169, pci mem f8c17000
    May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
    May 12 07:40:02 caught kernel: hub 1-0:1.0: USB hub found
    May 12 07:40:02 caught kernel: hub 1-0:1.0: 3 ports detected
    May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
    May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.1: irq 209, pci mem f8c19000
    May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    May 12 07:40:02 caught kernel: hub 2-0:1.0: USB hub found
    May 12 07:40:02 caught kernel: hub 2-0:1.0: 3 ports detected
    May 12 07:40:02 caught kernel: USB Universal Host Controller Interface driver v2.2
    May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver hiddev
    May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver hid
    May 12 07:40:02 caught kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    May 12 07:40:02 caught kernel: mice: PS/2 mouse device common for all mice
    May 12 07:40:02 caught kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    May 12 07:40:02 caught kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    May 12 07:40:02 caught kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
    May 12 07:40:02 caught kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    May 12 07:40:02 caught kernel: EISA: Probing bus 0 at eisa0
    May 12 07:40:02 caught kernel: EISA: Detected 0 cards.
    May 12 07:40:02 caught kernel: NET: Registered protocol family 2
    May 12 07:40:02 caught kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
    May 12 07:40:02 caught kernel: TCP: Hash tables configured (established 262144 bind 65536)
    May 12 07:40:02 caught kernel: NET: Registered protocol family 1
    May 12 07:40:02 caught kernel: NET: Registered protocol family 17
    May 12 07:40:02 caught kernel: NET: Registered protocol family 8
    May 12 07:40:02 caught kernel: NET: Registered protocol family 20
    May 12 07:40:02 caught kernel: ACPI: (supports S0 S1 S4 S5)
    May 12 07:40:02 caught kernel: md: Autodetecting RAID arrays.
    May 12 07:40:02 caught kernel: md: autorun ...
    May 12 07:40:02 caught kernel: md: ... autorun DONE.
    May 12 07:40:02 caught kernel: RAMDISK: Compressed image found at block 0
    May 12 07:40:02 caught kernel: VFS: Mounted root (minix filesystem).
    May 12 07:40:02 caught kernel: found reiserfs format "3.6" with standard journal
    May 12 07:40:02 caught kernel: reiserfs: using ordered data mode
    May 12 07:40:02 caught kernel: Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    May 12 07:40:02 caught kernel: reiserfs: checking transaction log (hda1) for (hda1)
    May 12 07:40:02 caught kernel: Using r5 hash to sort names
    May 12 07:40:02 caught kernel: Freeing unused kernel memory: 312k freed
    May 12 07:40:02 caught kernel: Real Time Clock Driver v1.12
    May 12 07:40:02 caught kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
    May 12 07:40:02 caught kernel: ts: Compaq touchscreen protocol output
    May 12 07:40:02 caught kernel: input: PC Speaker
    May 12 07:40:02 caught kernel: ALSA sound/pci/ac97/ac97_codec.c:1835: AC'97 0 analog subsections not ready
    May 12 07:40:02 caught kernel: intel8x0_measure_ac97_clock: measured 49405 usecs
    May 12 07:40:02 caught kernel: intel8x0: clocking to 48000
    May 12 07:40:02 caught kernel: kjournald starting. Commit interval 5 seconds
    May 12 07:40:02 caught kernel: EXT3 FS on hda2, internal journal
    May 12 07:40:02 caught kernel: EXT3-fs: mounted filesystem with ordered data mode.
    May 12 07:40:02 caught kernel: Supermount version 2.0.4 for kernel 2.6
    May 12 07:40:02 caught kernel: Linux agpgart interface v0.100 (c) Dave Jones
    May 12 07:40:02 caught kernel: agpgart: Detected SiS 648 chipset
    May 12 07:40:02 caught kernel: agpgart: Maximum main memory to use for agp memory: 816M
    May 12 07:40:02 caught kernel: agpgart: AGP aperture is 64M @ 0xf4000000
    May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
    May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: irq 225, pci mem f8d78000
    May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
    May 12 07:40:02 caught kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3
    May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
    May 12 07:40:02 caught kernel: hub 3-0:1.0: USB hub found
    May 12 07:40:02 caught kernel: hub 3-0:1.0: 6 ports detected
    May 12 07:40:02 caught kernel: Linux Kernel Card Services
    May 12 07:40:02 caught kernel: options: [pci] [cardbus] [pm]
    May 12 07:40:02 caught kernel: Intel ISA PCIC probe: not found.
    May 12 07:40:02 caught kernel: Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
    May 12 07:40:02 caught kernel: eth0: ADMtek Comet rev 17 at 0xf8dab000, 00:50:BF:AA:89:A0, IRQ 185.
    May 12 07:40:03 caught netfs: Montando outros sistemas de arquivos: succeeded
    May 12 07:40:03 caught atd: atd startup succeeded
    May 12 07:40:03 caught crond: crond startup succeeded
    May 12 07:40:02 caught sysctl: net.ipv4.ip_forward = 0
    May 12 07:40:02 caught sysctl: net.ipv4.conf.all.rp_filter = 1
    May 12 07:40:02 caught sysctl: net.ipv4.conf.default.rp_filter = 1
    May 12 07:40:02 caught sysctl: kernel.sysrq = 1
    May 12 07:40:02 caught sysctl: net.ipv4.conf.all.log_martians = 1
    May 12 07:40:02 caught sysctl: net.ipv4.ip_dynaddr = 0
    May 12 07:40:02 caught sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
    May 12 07:40:02 caught sysctl: net.ipv4.conf.all.accept_source_route = 0
    May 12 07:40:02 caught sysctl: net.ipv4.icmp_echo_ignore_all = 0
    May 12 07:40:02 caught sysctl: net.ipv4.icmp_ratemask = 6169
    May 12 07:40:02 caught sysctl: net.ipv4.icmp_ratelimit = 100
    May 12 07:40:02 caught sysctl: net.ipv4.tcp_syncookies = 1
    May 12 07:40:02 caught sysctl: net.ipv4.conf.all.accept_redirects = 0
    May 12 07:40:02 caught network: Configurando parâmetros de rede: succeeded
    May 12 07:40:02 caught network: Levantando interface lo: succeeded
    May 12 07:40:02 caught network: Bringing up interface eth0: succeeded
    May 12 07:40:02 caught portmap: portmap startup succeeded
    May 12 07:40:04 caught kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
    May 12 07:40:04 caught kernel: parport0: irq 7 detected
    May 12 07:40:04 caught kernel: lp0: using parport0 (polling).
    May 12 07:40:04 caught kernel: lp0: console ready
    May 12 07:40:04 caught cups: cupsd startup succeeded
    May 12 07:40:04 caught gpm[2068]: *** info [startup.c(150)]:
    May 12 07:40:04 caught gpm[2068]: Started gpm successfully. Entered daemon mode.
    May 12 07:40:05 caught gpm: gpm startup succeeded
    May 12 07:40:05 caught anacron[2123]: Anacron 2.3 started on 2005-05-12
    May 12 07:40:05 caught anacron: anacron startup succeeded
    May 12 07:40:05 caught anacron[2123]: Will run job `cron.daily' in 5 min.
    May 12 07:40:05 caught anacron[2123]: Will run job `cron.weekly' in 10 min.
    May 12 07:40:05 caught anacron[2123]: Will run job `cron.monthly' in 15 min.
    May 12 07:40:05 caught anacron[2123]: Jobs will be executed sequentially
    May 12 07:40:05 caught kernel: bootsplash: status on console 0 changed to on
    May 12 07:40:05 caught kernel: bootsplash: freeing silent jpeg
    May 12 07:40:05 caught kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    May 12 07:40:05 caught kernel: apm: overridden by ACPI.
    May 12 07:40:06 caught modprobe: FATAL: Error inserting apm (/lib/modules/2.6.5-63077cl/kernel/arch/i386/kernel/apm.ko): No such device
    May 12 07:40:06 caught kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
    May 12 07:40:06 caught kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
    May 12 07:40:06 caught kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
    May 12 07:40:06 caught kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
    May 12 07:40:51 caught kde(pam_unix)[2174]: session opened for user sysop by (uid=0)
    May 12 07:41:06 caught kernel: hdc: ATAPI 52X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
    May 12 07:41:06 caught kernel: Uniform CD-ROM driver Revision: 3.20
    May 12 07:41:06 caught kernel: hdd: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
    May 12 07:42:21 caught kernel: usb 2-1: new full speed USB device using address 2
    May 12 07:43:51 caught kernel: usb 2-1: USB disconnect, address 2
    May 12 07:45:05 caught anacron[2123]: Job `cron.daily' started
    May 12 07:45:05 caught anacron[2349]: Updated timestamp for job `cron.daily' to 2005-05-12
    May 12 07:45:07 caught kernel: end_request: I/O error, dev fd0, sector 0
    May 12 07:45:07 caught last message repeated 2 times
    May 12 07:45:22 caught anacron[2123]: Job `cron.daily' terminated
    May 12 07:50:05 caught anacron[2123]: Job `cron.weekly' started
    May 12 07:50:05 caught anacron[2413]: Updated timestamp for job `cron.weekly' to 2005-05-12
    May 12 07:51:02 caught anacron[2123]: Job `cron.weekly' terminated
    May 12 07:55:05 caught anacron[2123]: Job `cron.monthly' started
    May 12 07:55:05 caught anacron[2123]: Job `cron.monthly' terminated
    May 12 07:55:05 caught anacron[2123]: Normal exit (3 jobs run)
    May 12 07:55:05 caught anacron[8394]: Updated timestamp for job `cron.monthly' to 2005-05-12
    May 12 08:23:57 caught gconfd (sysop-8433): iniciando (versão 2.6.1), pid 8433 usuário 'sysop'
    May 12 08:23:57 caught gconfd (sysop-8433): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 08:23:57 caught gconfd (sysop-8433): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 08:23:57 caught gconfd (sysop-8433): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 08:28:27 caught gconfd (sysop-8433): O servidor GConf não está sendo usado, desligando.
    May 12 08:28:27 caught gconfd (sysop-8433): Terminando
    May 12 08:32:34 caught su(pam_unix)[8509]: session opened for user root by (uid=500)
    May 12 08:32:34 caught su(pam_unix)[8509]: session closed for user root
    May 12 08:32:34 caught su(pam_unix)[8514]: session opened for user root by (uid=500)
    May 12 08:32:34 caught kernel: Capability LSM initialized
    May 12 08:32:34 caught webmin: startup succeeded
    May 12 08:32:34 caught su(pam_unix)[8514]: session closed for user root
    May 12 08:33:39 caught network: Desligando interface eth0: succeeded
    May 12 08:33:39 caught sysctl: net.ipv4.ip_forward = 0
    May 12 08:33:39 caught sysctl: net.ipv4.conf.all.rp_filter = 1
    May 12 08:33:39 caught sysctl: net.ipv4.conf.default.rp_filter = 1
    May 12 08:33:39 caught sysctl: kernel.sysrq = 1
    May 12 08:33:39 caught sysctl: net.ipv4.conf.all.log_martians = 1
    May 12 08:33:39 caught sysctl: net.ipv4.ip_dynaddr = 0
    May 12 08:33:39 caught sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
    May 12 08:33:39 caught sysctl: net.ipv4.conf.all.accept_source_route = 0
    May 12 08:33:39 caught sysctl: net.ipv4.icmp_echo_ignore_all = 0
    May 12 08:33:39 caught sysctl: net.ipv4.icmp_ratemask = 6169
    May 12 08:33:39 caught sysctl: net.ipv4.icmp_ratelimit = 100
    May 12 08:33:39 caught sysctl: net.ipv4.tcp_syncookies = 1
    May 12 08:33:39 caught sysctl: net.ipv4.conf.all.accept_redirects = 0
    May 12 08:33:39 caught network: Configurando parâmetros de rede: succeeded
    May 12 08:33:39 caught network: Levantando interface lo: succeeded
    May 12 08:33:39 caught network: Bringing up interface eth0: succeeded
    May 12 08:33:43 caught network: Desligando interface eth0: succeeded
    May 12 08:33:43 caught sysctl: net.ipv4.ip_forward = 0
    May 12 08:33:43 caught sysctl: net.ipv4.conf.all.rp_filter = 1
    May 12 08:33:43 caught sysctl: net.ipv4.conf.default.rp_filter = 1
    May 12 08:33:43 caught sysctl: kernel.sysrq = 1
    May 12 08:33:43 caught sysctl: net.ipv4.conf.all.log_martians = 1
    May 12 08:33:43 caught sysctl: net.ipv4.ip_dynaddr = 0
    May 12 08:33:43 caught sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
    May 12 08:33:43 caught sysctl: net.ipv4.conf.all.accept_source_route = 0
    May 12 08:33:43 caught sysctl: net.ipv4.icmp_echo_ignore_all = 0
    May 12 08:33:43 caught sysctl: net.ipv4.icmp_ratemask = 6169
    May 12 08:33:43 caught sysctl: net.ipv4.icmp_ratelimit = 100
    May 12 08:33:43 caught sysctl: net.ipv4.tcp_syncookies = 1
    May 12 08:33:43 caught sysctl: net.ipv4.conf.all.accept_redirects = 0
    May 12 08:33:43 caught network: Configurando parâmetros de rede: succeeded
    May 12 08:33:43 caught network: Levantando interface lo: succeeded
    May 12 08:33:43 caught network: Bringing up interface eth0: succeeded
    May 12 09:02:38 caught gconfd (sysop-9495): iniciando (versão 2.6.1), pid 9495 usuário 'sysop'
    May 12 09:02:38 caught gconfd (sysop-9495): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 09:02:38 caught gconfd (sysop-9495): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 09:02:38 caught gconfd (sysop-9495): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 09:05:08 caught gconfd (sysop-9495): O servidor GConf não está sendo usado, desligando.
    May 12 09:05:08 caught gconfd (sysop-9495): Terminando
    May 12 09:19:04 caught su(pam_unix)[9560]: session opened for user root by sysop(uid=500)
    May 12 09:23:17 caught cups: cupsd shutdown succeeded
    May 12 09:23:18 caught cups: cupsd startup succeeded
    May 12 09:23:31 caught gconfd (root-9776): iniciando (versão 2.6.1), pid 9776 usuário 'root'
    May 12 09:23:31 caught gconfd (root-9776): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 09:23:31 caught gconfd (root-9776): Endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 09:23:31 caught gconfd (root-9776): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 09:23:34 caught gconfd (root-9776): Terminando
    May 12 09:24:36 caught gconfd (sysop-9926): iniciando (versão 2.6.1), pid 9926 usuário 'sysop'
    May 12 09:24:37 caught gconfd (sysop-9926): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 09:24:37 caught gconfd (sysop-9926): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 09:24:37 caught gconfd (sysop-9926): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 09:24:44 caught webmin: shutdown succeeded
    May 12 09:24:45 caught webmin: startup succeeded
    May 12 09:24:48 caught webmin: shutdown succeeded
    May 12 09:24:48 caught webmin: startup succeeded
    May 12 09:24:53 caught webmin: shutdown succeeded
    May 12 09:24:54 caught webmin: startup succeeded
    May 12 09:28:07 caught gconfd (sysop-9926): O servidor GConf não está sendo usado, desligando.
    May 12 09:28:07 caught gconfd (sysop-9926): Terminando
    May 12 09:32:01 caught kernel: Kernel logging (proc) stopped.
    May 12 09:32:01 caught kernel: Kernel log daemon terminating.
    May 12 09:32:02 caught syslog: klogd shutdown succeeded
    May 12 09:32:02 caught exiting on signal 15
    May 12 09:32:02 lablinux syslogd 1.4.1: restart.
    May 12 09:32:02 lablinux syslog: syslogd startup succeeded
    May 12 09:32:02 lablinux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    May 12 09:32:02 lablinux kernel: Inspecting /boot/System.map-2.6.5-63077cl
    May 12 09:32:02 lablinux syslog: klogd startup succeeded
    May 12 09:32:03 lablinux kernel: Loaded 29534 symbols from /boot/System.map-2.6.5-63077cl.
    May 12 09:32:03 lablinux kernel: Symbols match kernel version 2.6.5.
    May 12 09:32:03 lablinux kernel: No module symbols loaded - kernel modules not enabled.
    May 12 09:32:02 lablinux syslog: syslogd shutdown succeeded
    May 12 09:32:34 lablinux su(pam_unix)[9560]: session closed for user root
    May 12 10:00:31 lablinux gconfd (sysop-10751): iniciando (versão 2.6.1), pid 10751 usuário 'sysop'
    May 12 10:00:31 lablinux gconfd (sysop-10751): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 10:00:31 lablinux gconfd (sysop-10751): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 10:00:31 lablinux gconfd (sysop-10751): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 10:04:01 lablinux gconfd (sysop-10751): O servidor GConf não está sendo usado, desligando.
    May 12 10:04:01 lablinux gconfd (sysop-10751): Terminando
    May 12 10:05:08 lablinux gconfd (sysop-10876): iniciando (versão 2.6.1), pid 10876 usuário 'sysop'
    May 12 10:05:08 lablinux gconfd (sysop-10876): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 10:05:08 lablinux gconfd (sysop-10876): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 10:05:08 lablinux gconfd (sysop-10876): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 10:05:38 lablinux gconfd (sysop-10876): O servidor GConf não está sendo usado, desligando.
    May 12 10:05:38 lablinux gconfd (sysop-10876): Terminando
    May 12 10:08:03 lablinux su(pam_unix)[10902]: session opened for user root by sysop(uid=500)
    May 12 10:08:41 lablinux gconfd (sysop-10925): iniciando (versão 2.6.1), pid 10925 usuário 'sysop'
    May 12 10:08:41 lablinux gconfd (sysop-10925): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 10:08:41 lablinux gconfd (sysop-10925): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 10:08:41 lablinux gconfd (sysop-10925): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 10:15:43 lablinux network: Desligando interface eth0: succeeded
    May 12 10:15:43 lablinux sysctl: net.ipv4.ip_forward = 0
    May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.rp_filter = 1
    May 12 10:15:43 lablinux sysctl: net.ipv4.conf.default.rp_filter = 1
    May 12 10:15:43 lablinux sysctl: kernel.sysrq = 1
    May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.log_martians = 1
    May 12 10:15:43 lablinux sysctl: net.ipv4.ip_dynaddr = 0
    May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
    May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.accept_source_route = 0
    May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_echo_ignore_all = 0
    May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_ratemask = 6169
    May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_ratelimit = 100
    May 12 10:15:43 lablinux sysctl: net.ipv4.tcp_syncookies = 1
    May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.accept_redirects = 0
    May 12 10:15:43 lablinux network: Configurando parâmetros de rede: succeeded
    May 12 10:15:43 lablinux network: Levantando interface lo: succeeded
    May 12 10:15:43 lablinux network: Bringing up interface eth0: succeeded
    May 12 10:16:27 lablinux su(pam_unix)[10902]: session closed for user root
    May 12 10:16:56 lablinux su(pam_unix)[11646]: session opened for user root by sysop(uid=500)
    May 12 10:32:40 lablinux named[11753]: starting BIND 9.2.3 -u named -t /var/named
    May 12 10:32:40 lablinux named[11753]: using 1 CPU
    May 12 10:32:40 lablinux named[11753]: loading configuration from '/etc/named.conf'
    May 12 10:32:40 lablinux named[11753]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
    May 12 10:32:40 lablinux named[11753]: no IPv6 interfaces found
    May 12 10:32:40 lablinux named[11753]: listening on IPv4 interface lo, 127.0.0.1#53
    May 12 10:32:40 lablinux named[11753]: listening on IPv4 interface eth0, 192.168.0.254#53
    May 12 10:32:40 lablinux named[11753]: command channel listening on 127.0.0.1#953
    May 12 10:32:40 lablinux named[11753]: couldn't open pid file '/var/run/named/named.pid': Permission denied
    May 12 10:32:40 lablinux named[11753]: exiting (due to early fatal error)
    May 12 10:34:06 lablinux su(pam_unix)[11646]: session closed for user root
    May 12 10:39:14 lablinux named[12005]: starting BIND 9.2.3 -u named -t /var/named
    May 12 10:39:14 lablinux named[12005]: using 1 CPU
    May 12 10:39:14 lablinux named[12005]: loading configuration from '/etc/named.conf'
    May 12 10:39:14 lablinux named[12005]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
    May 12 10:39:14 lablinux named[12005]: no IPv6 interfaces found
    May 12 10:39:14 lablinux named[12005]: listening on IPv4 interface lo, 127.0.0.1#53
    May 12 10:39:14 lablinux named[12005]: listening on IPv4 interface eth0, 192.168.0.254#53
    May 12 10:39:14 lablinux named[12005]: command channel listening on 127.0.0.1#953
    May 12 10:39:14 lablinux named[12005]: couldn't open pid file '/var/run/named/named.pid': Permission denied
    May 12 10:39:14 lablinux named[12005]: exiting (due to early fatal error)
    May 12 10:40:57 lablinux named[12605]: starting BIND 9.2.3 -u named -t /var/named
    May 12 10:40:57 lablinux named[12605]: using 1 CPU
    May 12 10:40:57 lablinux named[12605]: loading configuration from '/etc/named.conf'
    May 12 10:40:57 lablinux named[12605]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
    May 12 10:40:57 lablinux named[12605]: no IPv6 interfaces found
    May 12 10:40:57 lablinux named[12605]: listening on IPv4 interface lo, 127.0.0.1#53
    May 12 10:40:57 lablinux named[12605]: listening on IPv4 interface eth0, 192.168.0.254#53
    May 12 10:40:57 lablinux named[12605]: command channel listening on 127.0.0.1#953
    May 12 10:40:57 lablinux named[12605]: couldn't open pid file '/var/run/named/named.pid': Permission denied
    May 12 10:40:57 lablinux named[12605]: exiting (due to early fatal error)
    May 12 10:51:48 lablinux su(pam_unix)[12647]: session opened for user root by sysop(uid=500)
    May 12 11:00:11 lablinux gconfd (sysop-10925): O servidor GConf não está sendo usado, desligando.
    May 12 11:00:11 lablinux gconfd (sysop-10925): Terminando
    May 12 11:00:13 lablinux su(pam_unix)[12647]: session closed for user root
    May 12 11:39:51 lablinux gconfd (sysop-12731): iniciando (versão 2.6.1), pid 12731 usuário 'sysop'
    May 12 11:39:52 lablinux gconfd (sysop-12731): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 11:39:52 lablinux gconfd (sysop-12731): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 11:39:52 lablinux gconfd (sysop-12731): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 11:43:56 lablinux su(pam_unix)[12745]: session opened for user root by sysop(uid=500)
    May 12 11:44:26 lablinux named[12772]: starting BIND 9.2.3 -u named -t /var/named
    May 12 11:44:26 lablinux named[12772]: using 1 CPU
    May 12 11:44:26 lablinux named[12772]: loading configuration from '/etc/named.conf'
    May 12 11:44:26 lablinux named[12772]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
    May 12 11:44:26 lablinux named[12772]: no IPv6 interfaces found
    May 12 11:44:26 lablinux named[12772]: listening on IPv4 interface lo, 127.0.0.1#53
    May 12 11:44:26 lablinux named[12772]: listening on IPv4 interface eth0, 192.168.0.254#53
    May 12 11:44:26 lablinux named[12772]: command channel listening on 127.0.0.1#953
    May 12 11:44:26 lablinux named[12772]: couldn't open pid file '/var/run/named/named.pid': Permission denied
    May 12 11:44:26 lablinux named[12772]: exiting (due to early fatal error)
    May 12 11:45:27 lablinux named: named shutdown failed
    May 12 11:45:27 lablinux named[12864]: starting BIND 9.2.3 -u named -t /var/named
    May 12 11:45:27 lablinux named[12864]: using 1 CPU
    May 12 11:45:27 lablinux named[12864]: loading configuration from '/etc/named.conf'
    May 12 11:45:27 lablinux named[12864]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
    May 12 11:45:27 lablinux named[12864]: no IPv6 interfaces found
    May 12 11:45:27 lablinux named[12864]: listening on IPv4 interface lo, 127.0.0.1#53
    May 12 11:45:27 lablinux named[12864]: listening on IPv4 interface eth0, 192.168.0.254#53
    May 12 11:45:27 lablinux named[12864]: command channel listening on 127.0.0.1#953
    May 12 11:45:27 lablinux named[12864]: couldn't open pid file '/var/run/named/named.pid': Permission denied
    May 12 11:45:27 lablinux named[12864]: exiting (due to early fatal error)
    May 12 11:48:46 lablinux su(pam_unix)[12745]: session closed for user root
    May 12 11:48:52 lablinux gconfd (sysop-12731): O servidor GConf não está sendo usado, desligando.
    May 12 11:48:52 lablinux gconfd (sysop-12731): Terminando
    May 12 11:53:50 lablinux gconfd (sysop-12966): iniciando (versão 2.6.1), pid 12966 usuário 'sysop'
    May 12 11:53:50 lablinux gconfd (sysop-12966): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
    May 12 11:53:50 lablinux gconfd (sysop-12966): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
    May 12 11:53:50 lablinux gconfd (sysop-12966): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
    May 12 11:55:43 lablinux su(pam_unix)[12975]: session opened for user root by sysop(uid=500)
    May 12 12:01:08 lablinux su(pam_unix)[12990]: authentication failure; logname=sysop uid=500 euid=0 tty= ruser=sysop rhost= user=root
    May 12 12:01:18 lablinux su(pam_unix)[12992]: session opened for user root by sysop(uid=500)



  3. #63
    Moderador Avatar de Bruno
    Ingresso
    Nov 2002
    Localização
    Guarapuava-PR
    Posts
    3.928
    Posts de Blog
    1

    Padrão Problemas ao iniciar BIND (resolvido)

    uma pergunta como esta seu named.conf

    e como esta seu resolv.conf

  4. #64

    Padrão Re: outra perhunta!!

    Citação Postado originalmente por robsonzornitta
    kr pode ser besteira minha mas c tah fazendu tudu issu no bind como root?

    pelo que eu vih ai em cima naum a naum ser que tu deu privilégio para o usuário sysop como root tbm ai sim mas vc tah utilizando superusuários pra fazeh issu?
    é estou fazendo turo como superusuario



  5. #65

    Padrão Problemas ao iniciar BIND (resolvido)

    Citação Postado originalmente por Benatto
    uma pergunta como esta seu named.conf

    e como esta seu resolv.conf
    Meu named.conf tá assim:

    // generated by named-bootconf.pl

    options {
    directory "/var/named";
    /*
    * If there is a firewall between you and nameservers you want
    * to talk to, you might need to uncomment the query-source
    * directive below. Previous versions of BIND always asked
    * questions using port 53, but BIND 8.1 uses an unprivileged
    * port by default.
    */
    // query-source address * port 53;
    dump-file "/var/named/dump/named_dump.db";
    statistics-file "/var/named/dump/named.stats";
    memstatistics-file "/var/named/dump/named.memstats";
    // remove this next line if you want named to listen on
    // all available interfaces, or adjust add new ones as
    // you see fit
    listen-on { 192.168.0.254;127.0.0.1/32; };

    };

    //
    // a caching only nameserver config
    //
    zone "." {
    type hint;
    file "named.ca";
    };

    zone "0.0.127.in-addr.arpa" {
    type master;
    file "named.local";
    };

    zone "synapse.com.br" {
    type master;
    file "/var/named/synapse.com.br.hosts";
    };
    zone "0.168.192.in-addr.arpa" {
    type master;
    file "/var/named/synapse.com.br.rev";
    };

    //
    // a shared secret for the rndc tool
    // this key must be the same one that is in the
    // /etc/rndc.conf file
    //

    //
    // a control channel for the new rndc tool
    //
    controls {
    inet 127.0.0.1 allow { localhost; } keys { key_rndc; };
    };

    e meu resolv.conf tá assim:

    seach www.synapse.com.br
    nameserver 192.168.0.254
    nameserver 200.165.132.148
    nameserver 200.165.132.155
    domain synapse.com.br

  6. #66
    robsonzornitta
    Visitante

    Padrão named.conf!!!

    ai achei vários erros no teu named.conf, ai vai um named.conf preparadu pra vc amigo:

    // secret must be the same as in /etc/rndc.conf
    key key_rndc {
    algorithm hmac-md5;
    secret "oriCelUSbPMypSjImBsiTHMauOumRPMkdBjoxVINAx0vxJZNRKGWzFCKibad";
    };

    controls {
    inet 127.0.0.1 port 953
    allow { 127.0.0.1; } keys { key_rndc; };
    };

    options {
    directory "/var/named/";
    pid-file "/var/run/named/named.pid"; // Put pid file in working dir
    auth-nxdomain yes;
    };

    zone "." {
    type hint;
    file "named.ca";
    };

    zone "0.0.127.in-addr.arpa" {
    type master;
    file "named.local";
    };

    // workaround stupid stuff... (OE: Wed 17 Sep 2003)
    zone "ac" { type delegation-only; };
    zone "cc" { type delegation-only; };
    zone "com" { type delegation-only; };
    zone "cx" { type delegation-only; };
    zone "museum" { type delegation-only; };
    zone "net" { type delegation-only; };
    zone "nu" { type delegation-only; };
    zone "ph" { type delegation-only; };
    zone "sh" { type delegation-only; };
    zone "tm" { type delegation-only; };
    zone "ws" { type delegation-only; };

    zone "synapse.com.br" {
    type master;
    file "synapse.com.br.hosts";
    allow-update { key key_rndc; };
    };

    zone "0.168.192.in-addr.arpa" {
    type master;
    file "synapse.com.br.rev";
    allow-update { key key_rndc; };
    };


    e o teu resolv.con deve ficar assim:


    seach synapse.com.br
    nameserver 192.168.0.254
    nameserver 200.165.132.148
    nameserver 200.165.132.155

    soh issu qualquer coisa como jah disse antes manda todos os aqruivos pra mim corrigiih se estiver algum erro nos achamos!!!!
    :good:



  7. #67

    Padrão Re: named.conf!!!

    Citação Postado originalmente por robsonzornitta
    ai achei vários erros no teu named.conf, ai vai um named.conf preparadu pra vc amigo:

    // secret must be the same as in /etc/rndc.conf
    key key_rndc {
    algorithm hmac-md5;
    secret "oriCelUSbPMypSjImBsiTHMauOumRPMkdBjoxVINAx0vxJZNRKGWzFCKibad";
    };

    controls {
    inet 127.0.0.1 port 953
    allow { 127.0.0.1; } keys { key_rndc; };
    };

    options {
    directory "/var/named/";
    pid-file "/var/run/named/named.pid"; // Put pid file in working dir
    auth-nxdomain yes;
    };

    zone "." {
    type hint;
    file "named.ca";
    };

    zone "0.0.127.in-addr.arpa" {
    type master;
    file "named.local";
    };

    // workaround stupid stuff... (OE: Wed 17 Sep 2003)
    zone "ac" { type delegation-only; };
    zone "cc" { type delegation-only; };
    zone "com" { type delegation-only; };
    zone "cx" { type delegation-only; };
    zone "museum" { type delegation-only; };
    zone "net" { type delegation-only; };
    zone "nu" { type delegation-only; };
    zone "ph" { type delegation-only; };
    zone "sh" { type delegation-only; };
    zone "tm" { type delegation-only; };
    zone "ws" { type delegation-only; };

    zone "synapse.com.br" {
    type master;
    file "synapse.com.br.hosts";
    allow-update { key key_rndc; };
    };

    zone "0.168.192.in-addr.arpa" {
    type master;
    file "synapse.com.br.rev";
    allow-update { key key_rndc; };
    };


    e o teu resolv.con deve ficar assim:


    seach synapse.com.br
    nameserver 192.168.0.254
    nameserver 200.165.132.148
    nameserver 200.165.132.155

    soh issu qualquer coisa como jah disse antes manda todos os aqruivos pra mim corrigiih se estiver algum erro nos achamos!!!!
    :good:
    Pô cara valeu mesmo vou colocar ele lá pra ver o que dá

  8. #68

    Padrão Re: named.conf!!!

    Citação Postado originalmente por robsonzornitta
    ai achei vários erros no teu named.conf, ai vai um named.conf preparadu pra vc amigo:

    // secret must be the same as in /etc/rndc.conf
    key key_rndc {
    algorithm hmac-md5;
    secret "oriCelUSbPMypSjImBsiTHMauOumRPMkdBjoxVINAx0vxJZNRKGWzFCKibad";
    };

    controls {
    inet 127.0.0.1 port 953
    allow { 127.0.0.1; } keys { key_rndc; };
    };

    options {
    directory "/var/named/";
    pid-file "/var/run/named/named.pid"; // Put pid file in working dir
    auth-nxdomain yes;
    };

    zone "." {
    type hint;
    file "named.ca";
    };

    zone "0.0.127.in-addr.arpa" {
    type master;
    file "named.local";
    };

    // workaround stupid stuff... (OE: Wed 17 Sep 2003)
    zone "ac" { type delegation-only; };
    zone "cc" { type delegation-only; };
    zone "com" { type delegation-only; };
    zone "cx" { type delegation-only; };
    zone "museum" { type delegation-only; };
    zone "net" { type delegation-only; };
    zone "nu" { type delegation-only; };
    zone "ph" { type delegation-only; };
    zone "sh" { type delegation-only; };
    zone "tm" { type delegation-only; };
    zone "ws" { type delegation-only; };

    zone "synapse.com.br" {
    type master;
    file "synapse.com.br.hosts";
    allow-update { key key_rndc; };
    };

    zone "0.168.192.in-addr.arpa" {
    type master;
    file "synapse.com.br.rev";
    allow-update { key key_rndc; };
    };


    e o teu resolv.con deve ficar assim:


    seach synapse.com.br
    nameserver 192.168.0.254
    nameserver 200.165.132.148
    nameserver 200.165.132.155

    soh issu qualquer coisa como jah disse antes manda todos os aqruivos pra mim corrigiih se estiver algum erro nos achamos!!!!
    :good:

    Eu fiz lá ele restartou legal mas ainga não encontra www.synapse.com.br
    só pinga para lablinux.synapse.com.br

    eu dei um named -g e deu isso:

    [[email protected] sysop]# /usr/sbin/named -g
    May 16 09:44:12.306 starting BIND 9.2.3 -g
    May 16 09:44:12.306 using 1 CPU
    May 16 09:44:12.308 loading configuration from '/etc/named.conf'
    May 16 09:44:12.328 no IPv6 interfaces found
    May 16 09:44:12.328 listening on IPv4 interface lo, 127.0.0.1#53
    May 16 09:44:12.329 binding TCP socket: address in use
    May 16 09:44:12.329 listening on IPv4 interface eth0, 192.168.0.254#53
    May 16 09:44:12.329 binding TCP socket: address in use
    May 16 09:44:12.329 listening on IPv4 interface eth1, 192.168.0.100#53
    May 16 09:44:12.329 binding TCP socket: address in use
    May 16 09:44:12.349 dns_master_load: named.ca:83: isc_lex_gettoken() failed: unexpected end of i nput
    May 16 09:44:12.349 dns_master_load: named.ca:83: unexpected end of input
    May 16 09:44:12.349 could not configure root hints from 'named.ca': unexpected end of input
    May 16 09:44:12.350 loading configuration: unexpected end of input
    May 16 09:44:12.350 exiting (due to fatal error)
    [[email protected] sysop]#



  9. #69
    fpmazzi
    Visitante

    Padrão Problemas ao iniciar BIND (resolvido)

    Posta ae o arquivos so synapse.com.br.hosts pra darmos uma olhada .. talvez o problema estaja la, ja ke o www nao resolve, o lablinux.synapse.com.br resolve, pois o mesmo esta no /etc/hosts, agora precisamos dar uma olhada no seu synapse.com.br.hosts...

    qualquer coisa entra em contato .. blz ...

    :good:

  10. #70

    Padrão Problemas ao iniciar BIND (resolvido)

    Citação Postado originalmente por fpmazzi
    Posta ae o arquivos so synapse.com.br.hosts pra darmos uma olhada .. talvez o problema estaja la, ja ke o www nao resolve, o lablinux.synapse.com.br resolve, pois o mesmo esta no /etc/hosts, agora precisamos dar uma olhada no seu synapse.com.br.hosts...

    qualquer coisa entra em contato .. blz ...

    :good:
    tá assim:

    $ttl 38400
    synapse.com.br. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
    1051034896
    10800
    36000
    604800
    38400 )
    synapse.com.br. IN A 192.168.0.254
    synapse.com.br. IN NS lablinux.synapse.com.br.
    synapse.com.br. IN MX 5 lablinux.synapse.com.br.
    www A 192.168.0.254



  11. #71

    Padrão Re: named.conf!!!

    Citação Postado originalmente por robsonzornitta
    ai achei vários erros no teu named.conf, ai vai um named.conf preparadu pra vc amigo:

    // secret must be the same as in /etc/rndc.conf
    key key_rndc {
    algorithm hmac-md5;
    secret "oriCelUSbPMypSjImBsiTHMauOumRPMkdBjoxVINAx0vxJZNRKGWzFCKibad";
    };

    controls {
    inet 127.0.0.1 port 953
    allow { 127.0.0.1; } keys { key_rndc; };
    };

    options {
    directory "/var/named/";
    pid-file "/var/run/named/named.pid"; // Put pid file in working dir
    auth-nxdomain yes;
    };

    zone "." {
    type hint;
    file "named.ca";
    };

    zone "0.0.127.in-addr.arpa" {
    type master;
    file "named.local";
    };

    // workaround stupid stuff... (OE: Wed 17 Sep 2003)
    zone "ac" { type delegation-only; };
    zone "cc" { type delegation-only; };
    zone "com" { type delegation-only; };
    zone "cx" { type delegation-only; };
    zone "museum" { type delegation-only; };
    zone "net" { type delegation-only; };
    zone "nu" { type delegation-only; };
    zone "ph" { type delegation-only; };
    zone "sh" { type delegation-only; };
    zone "tm" { type delegation-only; };
    zone "ws" { type delegation-only; };

    zone "synapse.com.br" {
    type master;
    file "synapse.com.br.hosts";
    allow-update { key key_rndc; };
    };

    zone "0.168.192.in-addr.arpa" {
    type master;
    file "synapse.com.br.rev";
    allow-update { key key_rndc; };
    };


    e o teu resolv.con deve ficar assim:


    seach synapse.com.br
    nameserver 192.168.0.254
    nameserver 200.165.132.148
    nameserver 200.165.132.155

    soh issu qualquer coisa como jah disse antes manda todos os aqruivos pra mim corrigiih se estiver algum erro nos achamos!!!!
    :good:
    no meu named.conf essa parte é realmente necessária:

    // workaround stupid stuff... (OE: Wed 17 Sep 2003)
    zone "ac" { type delegation-only; };
    zone "cc" { type delegation-only; };
    zone "com" { type delegation-only; };
    zone "cx" { type delegation-only; };
    zone "museum" { type delegation-only; };
    zone "net" { type delegation-only; };
    zone "nu" { type delegation-only; };
    zone "ph" { type delegation-only; };
    zone "sh" { type delegation-only; };
    zone "tm" { type delegation-only; };
    zone "ws" { type delegation-only; };

    eu coloquei ela. alás o meu named.conf tá exatamente igual o que vc mandou eu deixei do mesmo. só que agora qdo vou abrir o BIND lá no webmin do conectiva pra ver como ficou lá tá aparecendo um monte de dominios criados lá são eles todos os que estão listados acima: ac cc com cx ...

  12. #72
    robsonzornitta
    Visitante

    Padrão ai!!

    tipow foi mau jrctec, eh que naum falei nada issu ai eh apenas zonas de delegação naum eh necessário naum soh para controle em bind pra fora da lan e mesmo assim naum eh muito usadu foi mau, vc pode sim rancah issu dai ehehehehe

    falha nossa!!!!



  13. #73
    robsonzornitta
    Visitante

    Padrão ai velinhu!!!

    jrctec usa issu aqui no teu arquivo synapse.com.br.hosts:

    $ORIGIN .
    $TTL 86400 ; 1 day
    synapse.com.br IN SOA dns.synapse.com.br. root.synapse.com.br. (
    2001042703 ; serial
    86400 ; refresh (1 day)
    21600 ; retry (6 hours)
    3600000 ; expire (5 weeks 6 days 16 hours)
    3600 ; minimum (1 hour)
    )
    NS dns.synapse.com.br.
    $ORIGIN synapse.com.br.
    $TTL 86400 ; 1 day
    localhost A 127.0.0.1
    www A 192.168.0.254
    ftp A 192.168.0.254
    dns A 192.168.0.254

  14. #74
    robsonzornitta
    Visitante

    Padrão outro arquivo!!!

    jrctec usa issu aqui no teu arquivo synapse.com.br.rev:

    $ORIGIN .
    $TTL 86400 ; 1 day
    0.168.192.in-addr.arpa IN SOA dns.synapse.com.br. root.synapse.com.br. (
    2001042702 ; serial
    28800 ; refresh (8 hours)
    14400 ; retry (4 hours)
    3600000 ; expire (5 weeks 6 days 16 hours)
    86400 ; minimum (1 day)
    )
    NS dns.synapse.com.br.
    $ORIGIN 0.168.192.in-addr.arpa.
    $TTL 3600 ; 1 hour
    178 PTR dns.synapse.com.br.
    23 PTR www.synapse.com.br.


    e tenta ai!!!



  15. #75
    robsonzornitta
    Visitante

    Padrão outro arquivo!!!

    jrctec usa issu aqui no teu /etc/rndc.conf:

    # Start of rndc.conf
    key mykey {
    algorithm hmac-md5;
    secret "oriCelUSbPMypSjImBsiTHMauOumRPMkdBjoxVINAx0vxJZNRKGWzFCKibad";
    };

    options {
    default-key mykey;
    default-server 127.0.0.1;
    default-port 953;
    };

  16. #76
    robsonzornitta
    Visitante

    Padrão e por ultimo!!

    e por ultimo no teu arquivo /etc/rndc.key:

    key mykey {
    algorithm hmac-md5;
    secret "oriCelUSbPMypSjImBsiTHMauOumRPMkdBjoxVINAx0vxJZNRKGWzFCKibad";
    };


    espero que issu aqui te ajude!!!!!!!! :good: :clap:



  17. #77
    robsonzornitta
    Visitante

    Padrão ultima coisa!!!!!!

    ai jrctec cria um arquivo chamadu localhost.zone em /vatr/named, ou no diretório padraum do teu named se estiver em /var/named eh o padraum, entaum lah vai o arquivo:

    localhost.zone:

    $TTL 86400
    @ IN SOA dns.synapse.com.br. root.synapse.com.br (
    48 ; serial
    7200 ; refresh
    7200 ; retry
    604800 ; expire
    86400 ; ttl
    )

    IN NS dns.synapse.com.br.
    A 192.168.0.254

  18. #78

    Padrão Re: outro arquivo!!!

    Citação Postado originalmente por robsonzornitta
    jrctec usa issu aqui no teu arquivo synapse.com.br.rev:

    $ORIGIN .
    $TTL 86400 ; 1 day
    0.168.192.in-addr.arpa IN SOA dns.synapse.com.br. root.synapse.com.br. (
    2001042702 ; serial
    28800 ; refresh (8 hours)
    14400 ; retry (4 hours)
    3600000 ; expire (5 weeks 6 days 16 hours)
    86400 ; minimum (1 day)
    )
    NS dns.synapse.com.br.
    $ORIGIN 0.168.192.in-addr.arpa.
    $TTL 3600 ; 1 hour
    178 PTR dns.synapse.com.br.
    23 PTR www.synapse.com.br.


    e tenta ai!!!
    Robson amigo, de tanto eu fucar aqui a maquina tava uma enca entao eu dei uma zerada nela e agora to no slackware que parece que o pessoal gosta mais e dizem que e menos problematico pq faz tudo na mao.
    entao vou comecar tudo de novo agora e depois eu opsto de novo a medida que for dando pau, vou reler e estudar tudo que eu passei de errado nesse topico e que a galera me ajudou ate aqui e vou tentar pela mao que vcs me deram, valeu mesmo, agora vou dar umas configuradas basicas nos pepinos mais bobos do slack que tao faltando como por exemplo o teclado que ta errado e o kde pra ficar em portugues, se tiver jeito.



  19. #79
    robsonzornitta
    Visitante

    Padrão ai kr!!

    jrctec soh espero que saiba que naum te esquecemos e se precisar estamus ai pro que der e vier, faça o seguinte verifique a versaum do bind no slack se for 9 os meus arquivos vaum dar certu tenhu certeza dissu

    estou eserenadu respostas!!!!!!!!!

  20. #80
    fpmazzi
    Visitante

    Padrão Problemas ao iniciar BIND (resolvido)

    Citação Postado originalmente por jrctec
    Citação Postado originalmente por fpmazzi
    Posta ae o arquivos so synapse.com.br.hosts pra darmos uma olhada .. talvez o problema estaja la, ja ke o www nao resolve, o lablinux.synapse.com.br resolve, pois o mesmo esta no /etc/hosts, agora precisamos dar uma olhada no seu synapse.com.br.hosts...

    qualquer coisa entra em contato .. blz ...

    :good:
    tá assim:

    $ttl 38400
    synapse.com.br. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
    1051034896
    10800
    36000
    604800
    38400 )
    synapse.com.br. IN A 192.168.0.254
    synapse.com.br. IN NS lablinux.synapse.com.br.
    synapse.com.br. IN MX 5 lablinux.synapse.com.br.
    www A 192.168.0.254
    Carinha da uma olhada no seu arquivo de zona, tem uma pequena falha, como o servidor vai ter dois nomes, lablinux (/etc/hosts) e www (ke esta no dns), o www tem ke ser um cname, tente colocar desta maneira:

    $ttl 38400
    synapse.com.br. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
    1051034896
    10800
    36000
    604800
    38400 )
    synapse.com.br. IN A 192.168.0.254
    synapse.com.br. IN NS lablinux.synapse.com.br.
    synapse.com.br. IN MX 5 lablinux.synapse.com.br.
    www IN CNAME 192.168.0.254

    Tente e espero ke tenha ajudado ...

    abraços ...

    Posta ae o resultados ...

    :good: