+ Responder ao Tópico



  1. #1
    rafaelreissouza
    Amigos,

    tento enviar mensagem usando

    echo "teste" | mutt -s "teste" rafael@rolemar.com

    e o e-mail é enviado sem problemas

    agora se eu tentar assim

    echo ""teste" | mutt -s "teste" rsouza@sercomtel.com.br

    o e-mail nao vai...

    qualquer outro dominio tb nao funciona !

    Alguém pode me dar uma ajuda

  2. #2
    rafaelreissouza
    Veja o maillog

    --------------

    Sep 20 13:22:51 netserver sendmail[7460]: j8KHMns9007458: to=<filtro@marcelomazzia.com.br>, ctladdr=<root@localhost.localdomain> (0/0), delay=00:00:02, xdelay=00:00:02, mailer=esmtp, pri=1108838, relay=mailserver.marcelomazzia.com.br. [200.152.65.12], dsn=5.1.1, stat=User unknown



  3. #3
    panthro
    Mas qual a mensagem de erro q está retornando? Pode ser algum erro no dns tb. Esse dominio rolemar é o dominio a qual o sendmail pertence? Se for, ele só está enviando localmente.

  4. #4
    rafaelreissouza
    Depois de muito trabalho

    Consegui identificar que o meu sendmail está mandando a mensagem como

    root@netserver.rolemar.com (meu dominio valido é rolemar.com)
    e isso faz com que alguns provedores retornem a mensagem por nao estar usando um dominio valido.

    Eu já tentei de tudo para que o meu sendmail envie usando rolemar.com mais nao tive sucesso...


    Se alguem puder me dar uma ajuda segue sendmail.cf abaixo.

    sendmail-8.13.1-2


    ----------- sendmail.cf ------------------

    divert(-1)dnl
    dnl #
    dnl # This is the sendmail macro config file for m4. If you make changes to
    dnl # /etc/mail/sendmail.mc, you will need to regenerate the
    dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is
    dnl # installed and then performing a
    dnl #
    dnl # make -C /etc/mail
    dnl #
    include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
    VERSIONID(`setup for Red Hat Linux')dnl
    OSTYPE(`linux')dnl
    dnl #
    dnl # default logging level is 9, you might want to set it higher to
    dnl # debug the configuration
    dnl #
    dnl define(`confLOG_LEVEL', `9')dnl
    dnl #
    dnl # Uncomment and edit the following line if your outgoing mail needs to
    dnl # be sent out through an external mail server:
    dnl #
    dnl define(`SMART_HOST',`smtp.rolemar.com')
    dnl #
    define(`confDEF_USER_ID',``8:12'')dnl
    dnl define(`confAUTO_REBUILD')dnl
    define(`confTO_CONNECT', `1m')dnl
    define(`confTRY_NULL_MX_LIST',true)dnl
    define(`confDONT_PROBE_INTERFACES',true)dnl
    define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl
    define(`ALIAS_FILE', `/etc/aliases')dnl
    define(`STATUS_FILE', `/var/log/mail/statistics')dnl
    define(`UUCP_MAILER_MAX', `2000000')dnl
    define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl
    define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
    define(`confAUTH_OPTIONS', `A')dnl
    dnl #
    dnl # The following allows relaying if the user authenticates, and disallows
    dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links
    dnl #
    dnl define(`confAUTH_OPTIONS', `A p')dnl
    dnl #
    dnl # PLAIN is the preferred plaintext authentication method and used by
    dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do
    dnl # use LOGIN. Other mechanisms should be used if the connection is not
    dnl # guaranteed secure.
    dnl # Please remember that saslauthd needs to be running for AUTH.
    dnl #
    dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
    dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
    dnl #
    dnl # Rudimentary information on creating certificates for sendmail TLS:
    dnl # cd /usr/share/ssl/certs; make sendmail.pem
    dnl # Complete usage:
    dnl # make -C /usr/share/ssl/certs usage
    dnl #
    dnl define(`confCACERT_PATH',`/usr/share/ssl/certs')
    dnl define(`confCACERT',`/usr/share/ssl/certs/ca-bundle.crt')
    dnl define(`confSERVER_CERT',`/usr/share/ssl/certs/sendmail.pem')
    dnl define(`confSERVER_KEY',`/usr/share/ssl/certs/sendmail.pem')
    dnl #
    dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's
    dnl # slapd, which requires the file to be readble by group ldap
    dnl #
    dnl define(`confDONT_BLAME_SENDMAIL',`groupreadablekeyfile')dnl
    dnl #
    dnl define(`confTO_QUEUEWARN', `4h')dnl
    dnl define(`confTO_QUEUERETURN', `5d')dnl
    dnl define(`confQUEUE_LA', `12')dnl
    dnl define(`confREFUSE_LA', `18')dnl
    define(`confTO_IDENT', `0')dnl
    dnl FEATURE(delay_checks)dnl
    FEATURE(`no_default_msa',`dnl')dnl
    FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
    FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
    FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
    FEATURE(redirect)dnl
    FEATURE(always_add_domain)dnl
    FEATURE(use_cw_file)dnl
    FEATURE(use_ct_file)dnl
    dnl #
    dnl # The following limits the number of processes sendmail can fork to accept
    dnl # incoming messages or process its message queues to 12.) sendmail refuses
    dnl # to accept connections once it has reached its quota of child processes.
    dnl #
    dnl define(`confMAX_DAEMON_CHILDREN', 12)dnl
    dnl #
    dnl # Limits the number of new connections per second. This caps the overhead
    dnl # incurred due to forking new sendmail processes. May be useful against
    dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address
    dnl # limit would be useful but is not available as an option at this writing.)
    dnl #
    dnl define(`confCONNECTION_RATE_THROTTLE', 3)dnl
    dnl #
    dnl # The -t option will retry delivery if e.g. the user runs over his quota.
    dnl #
    FEATURE(local_procmail,`',`procmail -t -Y -a $h -d $u')dnl
    FEATURE(`access_db',`hash -T<TMPF> -o /etc/mail/access.db')dnl
    FEATURE(`blacklist_recipients')dnl
    EXPOSED_USER(`root')dnl
    dnl #
    dnl # The following causes sendmail to only listen on the IPv4 loopback address
    dnl # 127.0.0.1 and not on any other network devices. Remove the loopback
    dnl # address restriction to accept email from the internet or intranet.
    dnl #
    DAEMON_OPTIONS(`Port=smtp,Addr=0.0.0.0, Name=MTA')dnl
    dnl #
    dnl # The following causes sendmail to additionally listen to port 587 for
    dnl # mail from MUAs that authenticate. Roaming users who can't reach their
    dnl # preferred sendmail daemon due to port 25 being blocked or redirected find
    dnl # this useful.
    dnl #
    dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl
    dnl #
    dnl # The following causes sendmail to additionally listen to port 465, but
    dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed
    dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't
    dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS
    dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps
    dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1.
    dnl #
    dnl # For this to work your OpenSSL certificates must be configured.
    dnl #
    dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl
    dnl #
    dnl # The following causes sendmail to additionally listen on the IPv6 loopback
    dnl # device. Remove the loopback address restriction listen to the network.
    dnl #
    dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl
    dnl #
    dnl # enable both ipv6 and ipv4 in sendmail:
    dnl #
    dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6')
    dnl #
    dnl # We strongly recommend not accepting unresolvable domains if you want to
    dnl # protect yourself from spam. However, the laptop and users on computers
    dnl # that do not have 24x7 DNS do need this.
    dnl #
    FEATURE(`accept_unresolvable_domains')dnl
    dnl #
    dnl FEATURE(`relay_based_on_MX')dnl
    dnl #
    dnl # Also accept email sent to "localhost.localdomain" as local email.
    dnl #
    LOCAL_DOMAIN(`rolemar.com')dnl
    dnl #
    dnl # The following example makes mail from this host and any additional
    dnl # specified domains appear to be sent from mydomain.com
    dnl #
    MASQUERADE_AS(`rolemar.com')dnl
    dnl #
    dnl # masquerade not just the headers, but the envelope as well
    dnl #
    FEATURE(masquerade_envelope)dnl
    dnl #
    dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well
    dnl #
    dnl FEATURE(masquerade_entire_domain)dnl
    dnl #
    dnl MASQUERADE_DOMAIN(localhost)dnl
    dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl
    MASQUERADE_DOMAIN(rolemar.com)dnl
    dnl MASQUERADE_DOMAIN(mydomain.lan)dnl
    MAILER(smtp)dnl
    MAILER(procmail)dnl






Tópicos Similares

  1. Respostas: 6
    Último Post: 09-09-2003, 07:23
  2. Sendmail - não envia nem recebe e-mail
    Por Perdigao no fórum Servidores de Rede
    Respostas: 8
    Último Post: 09-08-2003, 12:19
  3. postfix não envia mensagem acima de 20MB
    Por Leyzem no fórum Servidores de Rede
    Respostas: 6
    Último Post: 21-03-2003, 08:24
  4. sendmail não envia para hotmail.com.br
    Por no fórum Servidores de Rede
    Respostas: 2
    Último Post: 18-02-2003, 10:40
  5. SENDMAIL NÃO ENVIA ESTOURA O TEMPO
    Por no fórum Servidores de Rede
    Respostas: 0
    Último Post: 09-09-2002, 09:52

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L